Electronic Surveillance Please respond to the following .docx

•Télécharger en tant que DOCX, PDF•

0 j'aime•3 vues

This document discusses a case from the last 5 years involving suspected terrorist activities where electronic surveillance was used. It asks the reader to summarize the case and circumstances, then provide an opinion for or against the use of electronic surveillance of US citizens without court orders in suspected terrorism cases, supported with reasons.

Formation

"Electronic Surveillance"
Please respond to the following:
Use the Internet or the Strayer Online Library (
https://research.strayer.edu
) to research, identify, and examine a case involving suspected
terrorist activities where electronic surveillance was used from
within the last five years. Summarize the case and the
circumstances. Then, support your opinion for or against the use
of electronic surveillance of U.S. citizens without court orders
in cases of suspected terrorist activities. Provide support for
your opinion.

Contenu connexe

Plus de toltonkendal

Elements of Music Report Instruments For the assignment on the elements of music, students will write a report with a minimum of 300 words. Students must select one element of music that they consider to be the most important element: Melody Rhythm Harmony Form When writing the report, be sure you address the following questions: Why did you select this element from among all the rest? Do you think that all kinds of music could exist without your selected element? Elaborate on your view. Describe a piece of music that highlights the use of your selected element. I encourage students do research on their element of music in order to get ideas for their reports. All reports must be original works! Do not quote any source or anybody’s thoughts. Quotes are not permitted in this Instruments Report. I am interested in your own personal thoughts, opinions, and the material you have learned from your research. .

Elements of Music Report InstrumentsFor the assignment on the el.docx

toltonkendal

Elements of Genre After watching three of the five movie clips listed in the Multimedia section, above, describe how they fit into a specific genre (or subgenre) as explained in the text. What elements of the film are characteristic of that genre? How does it fulfill the expectations of that genre? How does it play against these expectations? Your initial post should be at least 150 words in length. Support your claims with examples from required material(s) and/or other scholarly resources, and properly cite any references. .

Elements of GenreAfter watching three of the five .docx

toltonkendal

Elements of Design During the process of envisioning and designing a film, the director, production designer, and art director (in collaboration with the cinematographer) are concerned with several major spatial and temporal elements. These design elements punctuate and underscore the movement of figures within the frame, including the following: setting, lighting, costuming, makeup, and hairstyles. Choose a scene from movieclips.com. In a three to five page paper, (excluding the cover and reference pages) analyze the mise-en-scène. Respond to the following prompts with at least one paragraph per bulleted topic: Identify the names of the artists involved in the film’s production: the director, the production designer, and the art director. Describe in separate paragraphs each artist’s role in the overall design process. Conduct additional research if necessary, citing your book, film, and other external sources correctly in APA format. Explain how the artists utilize lighting in the scene. How does the lighting affect our emotional understanding of certain characters? What sort of mood does the lighting evoke? How does lighting impact the overall story the filmmaker is attempting to tell? Describe the setting, including the time period, location, and culture in which the film takes place. Explain what costuming can tell us about a character. In what ways can costuming be used to reflect elements of the film's plot? Explain how hairstyle and makeup can help tell the story. What might hairstyle and makeup reveal about the characters? Discuss your opinion regarding the mise-en-scène. Do the elements appear to work together in a harmonious way? Does the scene seem discordant? Do you think the design elements are congruent with the filmmaker’s vision for the scene? .

Elements of DesignDuring the process of envisioning and designing .docx

toltonkendal

Elements of Critical Thinking [WLOs 2, 3, 4] [CLOs 2, 3, 4]P.docx

toltonkendal

Elements of DesignDuring the process of envisioning and design.docx

toltonkendal

Elements of a contact due 16 Oct Read the Case Campbell Soup Co. v. Wentz in the text. Answer the following questions: 1. What were the terms of the contract between Campbell and the Wentzes? 2. Did the Wentzes perform under the contract? 3. Did the court find specific performance to be an adequate legal remedy in this case? 4. Why did the court refuse to help Campbell in enforcing its legal contract? 5. How could Campbell change its contract in the future so as to avoid the unconsionability problem? Facts: Per a written contract between Campbell Soup Company (a New Jersey company) and the Wentzes (carrot farmers in Pennsylvania), the Wentzes would deliver to Campbell all the Chantenay red cored carrots to be grown on the Wentz farm during the 1947 season. The contract price for the carrots was $30 per ton. The contract between Campbell Soup and all sellers of carrots was drafted by Campbell and it had a provision that prohibited farmers/sellers from selling their carrots to anyone else, except those carrots that were rejected by Campbell. The contract also had a liquidated damages provision of $50 per ton if the seller breached, but it had no similar provision in the event Campbell breached. The contract not only allowed Campbell to reject nonconforming carrots, but gave Campbell the right to determine who could buy the carrots it had rejected. The Wentzes harvested 100 tons of carrots, but because the market price at the time of harvesting was $90 per ton for these rare carrots, the Wentzes refused to deliver them to Campbell and sold 62 tons of their carrots to a farmer who sold some of those carrots to Campbell. Campbell sued the Wentzes, asking for the court's order to stop further sale of the contracted carrots to others and to compel specific performance of the contract. The trial court ruled for the Wentzes and Campbell appealed. Issues: Is specific performance an appropriate legal remedy in this case or is the contract unconscionable? Discussion: In January 1948, it was virtually impossible to obtain Chantenay carrots in the open market. Campbell used Chantenay carrots (which are easier to process for soup making than other carrots) in large quantities and furnishes the seeds to farmers with whom it contracts. Campbell contracted for carrots long ahead, and farmers entered into the contract willingly. If the facts of this case were this simple, specific performance should have been granted. However, the problem is with the contract itself, which was one-sided. According to the appellate court, the most direct example of unconscionability was the provision that, under certain .

Elements of a contact due 16 OctRead the Case Campbell Soup Co. v..docx

toltonkendal

Elements for analyzing mise en scene Identify the components of the shot, but explaining the meaning or significance behind those components and connecting the shot to the themes of the film 1. Dominant: Where is the eye attracted first? Why? 2. Lighting key: High key? Low key? High contrast? Some combination of these? 3. Shot and camera proxemics: What type of shot? How far away is the camera from the action? 4. Angle: Is the viewer (through the eye of the camera) looking up or down on the subject? Or is the camera neutral (eye level)? 5. Color values: What is the dominant color? Are there contrasting foils? Is there color symbolism? 6. Lens/filter/stock: How do these distort or comment on the photographed materials? 7. Subsidiary contrasts: What are the main eye-stops after taking in the dominant? 8. Density: How much visual information is packed into the image? Is the texture stark, moderate, or highly detailed? 9. Composition: How is the two-dimensional space segmented and organized? What is the underlying design? 10. Form: Open or closed? Does the image suggest a window that arbitrarily isolates a fragment of the scene? Or a proscenium arch, in which the visual elements are carefully arranged and held in balance? 11. Framing: Tight or loose? Do characters have little to no room to move, or can they move freely without impediments? 12. Depth: On how many planes is the image composed? Does the background or foreground comment in any way on the midground? 13. Character placement: What part of the framed space do the characters occupy? Center? Top? Bottom? Edges? Why? 14. Staging positions: Which way do the characters look vis-à-vis the camera? 15. Character proxemics: How much space is between the characters? What are the 4 distinct formal elements that make up a film's mise en scene? • staging of the action • physical setting and decor • the manner in which these materials are framed • the manner in which they are photographed .

Elements for analyzing mise en sceneIdentify the components of.docx

toltonkendal

Elements in the same row have the same number of () levelsWhi.docx

toltonkendal

ELEG 421 Control Systems Transient and Steady State Response Analyses Dr. Ashraf A. Zaher American University of Kuwait College of Arts and Science Department of Electrical and Computer Engineering Layout 2 Objectives This chapter introduces the analysis of the time response of different control systems under different scenarios. Only first and second order systems will be considered in details using analytical and numerical methods. Extension to higher order systems will be developed. Both transient and steady state responses will be evaluated. Stability analysis will be analyzed for different kinds of feedback, while investigating the effect of both proportional and derivative control actions on the performance of the closed-loop system. Finally systems types and steady state errors will be calculated for unity feedback. Outcomes By the end of this chapter, students will be able to:  evaluate both transient/steady state responses for control systems,  analyze the stability of closed-loop LTI systems,  investigate the effect of P and I control actions on performance, and  understand dominant dynamics of higher order systems. Dr. Ashraf Zaher Introduction 3 Test signals Transient response Steady state response Analytical techniques, and Numerical (simulation) techniques. Stability (definition and analysis methods), Relative stability, and Effect of P/I control actions on stability and performance. Summary of the used systems:  First order systems,  Second order systems, and  Higher order systems. Dr. Ashraf Zaher Test Signals 4 Dr. Ashraf Zaher Impulse function:  Used to simulate shock inputs,  Laplace transform: 1. Step function:  Used to simulate sudden disturbances,  Laplace transform: 1/s. Ramp function:  Used to simulate gradually changing inputs,  Laplace transform: 1/s2. Sinusoidal function(s):  Used to test response to a certain frequency,  Laplace transform: s/(s2+ω2) for cos(ωt) and ω/(s2+ω2) for sin(ωt). White noise function:  Used to simulate random noise,  It is a stochastic signal that is easier to deal with in the time domain. Total response: C(s) = R(s)*TF(s) = Ctr(s) + Css(s) → c(t) = ctr(t) + css(t) Fundamentals 5 Dr. Ashraf Zaher Definitions:  Zeros (Z) of the TF  Poles (P) of the TF  Transient Response (Natural)  Steady State Response (Forced)  Total Response Limits:  Initial values  Final values Systems (?Zs):  First order (one P)  Second order (two Ps)  Higher order! More:  Stability and relative stability  Steady state errors (unity feedback) First Order Systems 6 Dr. Ashraf Zaher TF: T: time constant Unit Step Response: 1 1 )( )( + = TssR sC )/1( 11 1 1 1 11 )( TssTs T sTss sC + −= + −= + = Ttetc /1)( −−= 632.01)( 1 =−== −eTtc T e Tdt tdc Tt t 11)( / 0 == − = 01)0( 0 =−== etc 11)( =−=∞= −∞etc First Order Systems.

ELEG 421 Control Systems Transient and Steady State .docx

toltonkendal

Element 010 ASSIGNMENT: 3000 WORDS (100%) Task: Individual assignment (3000 words) Weighting: 100% Assessment Case Study: Greenland Garden Centre [1] Jon Smith spread his arms widely as he surveyed his garden centre. ‘Of course the whole market for leisure products and services, especially garden-related products, has been expanding over the last few years. Even so, we have been particularly successful. Partly this is because we are conveniently located, but it is also because we have developed a reputation for excellent service. Customers like coming to us for advice. We have also been successful in attracting some of the ‘personality gardeners’ from television to make special appearances. My main ambition now is to fully develop all of our twelve hectares to make the centre a place people will want to visit in its own right. I envisage the centre developing into almost a mini gardening theme park with special gardens, beautiful grounds and special events.’ Greenland is a large village situated in the Cotswolds, a popular tourist area of the UK. It has an interesting range of shops and restaurants, mainly catering for the tourist trade. About half a mile outside the village is the Greenland Garden Centre. The garden centre is served by a good network of main roads but is inaccessible by public transport. Growth over the last five years has been dramatic and the garden centre now sells many other goods as well as gardening requisites. It also has a restaurant. It is open seven days a week, only closing on Christmas Day. Its opening hours are Monday– Saturday 9 a.m. to 6 p.m. and Sunday 10 a.m. to 5 p.m. all year round. Outside the centre The centre has a large car park which can accommodate about 350 cars. Outside the entrance a map indicates the various areas in the garden centre. Most customers walk round the grounds before making their purchases. The length of time people spend in the centre varies but, according to a recent study, averages 53 minutes during the week and 73 minutes at weekends. The same study shows the extent to which the number of customers arriving at the garden centre varies depending on the time of year, day of the week, and time of day. There are two peaks in customer numbers, one during the late spring/early summer period and another in the build up to Christmas, as Greenland puts on particularly good Christmas displays. Indoor sales area The range of goods has increased dramatically over the past few years and now includes items such as: pets and aquatics seeds fertilisers indoor pots and plants gardening equipment garden lighting conservatory-style furniture outdoor clothing picture gallery books and toys delicatessen wine kitchen equipment soft furnishing outdoor eating equipment gifts, stationery, cards, aromatherapy products freshly cut flowers dried flowers. Outside sales area In the open air and in large glasshouses there is a complete range of plants, shrubs and trees. Gre.

Element 010 ASSIGNMENT 3000 WORDS (100)Task Individual assign.docx

toltonkendal

ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4 1 LAB 4: CONVOLUTION Background & Concepts Convolution is denoted by: 𝑦[𝑛] = 𝑥[𝑛] ∗ ℎ[𝑛] Your book has described the "flip and shift" method for performing convolution. First, we set up two signals 𝑥[𝑘] and ℎ[𝑘]: Flip one of the signals, say ℎ[𝑘], to form ℎ[−𝑘]: ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4 2 Shift ℎ[−𝑘] by n to form ℎ[𝑛 − 𝑘]. For each value of 𝑛, form 𝑦[𝑛] by multiplying and summing all the element of the product of𝑥[𝑘]ℎ[𝑛 − 𝑘], −∞ < 𝑘 < ∞. The figure below shows an example of the calculation of𝑦[1]. The top panel shows𝑥[𝑘]. The middle panel showsℎ[1 − 𝑘]. The lower panel shows𝑥[𝑘]𝑦[1 − 𝑘]. Note that this is a sequence on a 𝑘 axis. The sum of the lower sequence over all k gives 𝑦[1] = 2. We repeat this shifting, multiplication and summing for all values of 𝑛 to get the complete sequence 𝑦[𝑛]: ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4 3 The conv Command conv(x,h) performs a 1-D convolution of vectors 𝑥 and ℎ. The resulting vector 𝑦 has length length(𝑦) = length(𝑥) + length(ℎ) − 1. Imagine vector 𝑥 as being stationary and the flipped version of ℎ is slid from left to right. Note that conv(x,h) = conv(h,x). An example of the convolution of two signals and plotting the result is below: >> x = [0.5 0.5 0.5]; %define input signal x[n] >> h = [3.0 2.0 1.0]; %unit-pulse response h[n] >> y = conv(x,h); %compute output y[n] via convolution >> n = 0:(length(y)-1); %for plotting y[n] >> stem(n,y) % plot y[n] >> grid; >> xlabel('n'); >> ylabel('y[n]'); >> title('Output of System via Convolution'); ELEG 320L – Signals & Systems Laboratory /Dr. Jibran Khan Yousafzai Lab 4 4 Deconvolution The command [q,r] = deconv(v,u), deconvolves vector u out of vector v, using long division. The quotient is returned in vector q and the remainder in vector r such that v = conv(u,q)+r. If u and v are vectors of polynomial coefficients, convolving them is equivalent to multiplying the two polynomials, and deconvolution is polynomial division. The result of dividing v by u is quotient q and remainder r. An examples is below: If >> u = [1 2 3 4]; >> v = [10 20 30]; The convolution is: >> c = conv(u,v) c = 10 40 100 160 170 120 Use deconvolution to recover v. >> [q,r] = deconv(c,u) q = 10 20 30 r = 0 0 0 0 0 0 This gives a quotient equal to v and a zero remainder. Structures Structures in Matlab are just like structures in C. They are basically containers that allow one

ELEG 320L – Signals & Systems Laboratory Dr. Jibran Khan Yous.docx

toltonkendal

Electronic Media Presentation Choose two of the following types of electronic media: Radio Sound recording Motion pictures Broadcast television Research the history of the media types your team selected. Include the following information in your presentation: Introduction Notable founders and parent organizations of your electronic media types Notable historical dates Dates of mergers with other radio stations, record production companies, motion picture companies, or television networks to form a large media conglomerate Date the media types launched their websites, became active on the Internet, or became active in social media integration Identify past, present, and future challenges confronting these types of media. How has the digital era affected them? Which types are best suited to adapt to the future? Explain why How do these challenges affect advertising in these organizations--outside companies advertising--and advertising for these media--companies promoting themselves to others? What are innovative advertising strategies these media have engaged in? What are two similarities and two differences between the two media types? Conclusion Present your Electronic Media Presentation. These are 10- to 12-slideMicrosoft ® PowerPoint ® presentations with notes. .

Electronic Media PresentationChoose two of the following.docx

toltonkendal

Electronic copy available at: http://ssrn.com/abstract=2161742 Electronic Commerce Business Models: A Conceptual Framework By Utkarsh Majmudar Ganesh N. Prabhu July 2000 Please address all correspondence to: Prof. Utkarsh Majmudar Visiting Faculty (Finance & Control Area) Indian Institute of Management Bannerghatta Road Bangalore - 560 076 India Fax: (080) 6584050 E m a i l ! utkarsh&qimbxmeUn Copies of the Working Papers may be obtained from the FPM & Research Office Electronic copy available at: http://ssrn.com/abstract=2161742 Electronic Commerce Business Models: A Conceptual Framework Utkarsh Majmudar and Ganesh N. Prabhu Abstract The recent boom in the new economy of internet based commerce has created a large number of firms with a variety of business models that aim to leverage the power of the internet to further their business goals. In this paper we attempt to provide a conceptual framework for understanding e-commerce business models on a number of important dimensions - nature of consumer activity, nature of e-commerce activity, target customers, targeting strategy, revenue generating modes, procfactfcerwce delivery modes, payment collection modes, operating modes, market places, advantage mechanisms and domination characteristics. We also examine means of improving value proposition and net-friendliness for e-commerce activities and identify areas where e-commerce models have not been explored or fully exploited so far. Since the range of economic activities on the internet is vast and growing, newer models and opportunities are likely to emerge through improvements in internet technologies as well as innovations in their application to business contexts. Hence any conceptual framework on e-commerce business models, including our own, can never be comprehensive. Electronic Commerce Business Models: A Conceptual Framework - 1 - Electronic copy available at: http://ssrn.com/abstract=2161742 Electronic Commerce Business Models: A Conceptual Framework Introduction The recent boom in the new economy of internet based commerce has spawned a large number of firms with a variety of business models that aim to leverage the power of the internet to further their business goals. This paper provides a conceptual framework for understanding these business models and their characteristics. The conceptual framework is shown in Figure 1. Locating Electronic Commerce in the Internet Economy We define electronic commerce as use of the internet medium for conducting economic transactions. Electronic commerce is a part of a larger internet economy. Conceptually, the internet economy can be divided into four layers (Barua etal., 1999). Each layer of the internet economy is listed below with descriptions of the types of companies and names of some of the actual companies in each category. (a) Layer One: The Internet Infrastructure Layer. This layer includes companies with products and services that help cr.

Electronic copy available at httpssrn.comabstract=2161742.docx

toltonkendal

Electronic Health Records Instructions: As implementation of electronic health records (EHRs) continues to grow, so does the liability and risk for health care providers. Assume the role of a manager for a small, community clinic. Your sponsoring entity (a large non-profit hospital system) will soon be adding your clinic to their EHR network. As the clinic manager, you must identify the vulnerabilities and potential risks your clinic and users could face with this implementation, as well as recognize the benefits. Conduct research on EHR implementation, including benefits and risks. From a managerial perspective, what concerns (legal, ethical and operational) do you have about the implementation? How will having EHR benefit your patients and providers? Please be sure to validate your opinions and ideas with citations and references in APA format. Please post 2 peer responses. In the response post, include the following: Take your colleague's concerns into consideration. What advice can you offer to mitigate the risk involved? Include at least one scholarly source to support your advice. Please be sure to validate your opinions and ideas with citations and references in APA format. .

Electronic Health RecordsInstructionsAs implementation of e.docx

toltonkendal

Electronic copy available at: http://ssrn.com/abstract=2155540 INDIA: a fab-less wonder: case of SMDP A.S.Rao [email protected] Abstract From IPod to I Pad, millions of electronics goods have rolled out of China, the global manufacturing hub. India’s share of global electronic product market is less than 3%. Taiwan had $72 billion of investment in Fabs, where as India stands out as one the aspiring nation with no Fab. Yet, top 25 global semiconductor companies now have a presence in India through their captive centers, working in cutting edge technology nodes. Among the top twenty U.S. semiconductor companies, only two have not established a design center in India. While, Government of India is not successful in attracting manufacturing, appear to have made a significant contribution by focusing on talent supply. Department of Information Technology (DIT) implemented Special Manpower Development Programme in the area of VLSI design and related software (SMDP) and trained over 20,000 engineers. This paper is about SMDP as case study and is based on Impact Assessment of SMDP-II assigned by DIT on IIMA. Prior to 1980s, the semiconductor industry was vertically integrated. Semiconductor companies owned and operated their own silicon wafer fabrication facilities and developed their own process technology for manufacturing their chips. These companies also carried out the fabrication, assembly and testing of their chips. Innovative chip design start-ups and Taiwan’s business model led to the birth of foundry industry. South Korea and Taiwan In Tiger Technology: Creation of a Semiconductor Industry in East Asia John A. Mathews and Dong-Sung Cho gave a comparative account of the support given by the Korean and Taiwanese states to their local semiconductor producers. South Korean government considered semiconductors vital to the modernization of domestic industries and manufacturing consumer electronics. The state used Korea’s large conglomerates, or chaebol, as a vehicle to move into the industry through direct brokerage with different firms and by offering substantial financial assistance. Taiwanese government did not have the convenience of large conglomerates that could be directed towards semiconductor production. Instead, the government sponsored initiatives to develop a domestic industry through the establishment of research and production capabilities before the creation of private firms. At the same time, re-organization of production in the global economy also played an equally integral part for the transformation of East Asia and the development of domestic semiconductor industries in South Korea and Taiwan. In `Globalisation of High Technology Production’, Jeffery Henderson places the focus of analysis on the development of networks of production in the global semiconductor industry. He asserts that these production networks developed after tran.

Electronic copy available at httpssrn.comabstract=2155540.docx

toltonkendal

el señor Díaz Addressing him: Talking about him: Question 2 with 2 blanksJimena y Marissa Addressing them: Talking about them: Question 3 with 2 blanksMaru y Miguel Addressing them: Talking about them: Question 4 with 2 blanksla profesora Addressing her: Talking about her: Question 5 with 2 blanksun estudiante Addressing him: Talking about him: Question 6 with 2 blanksel director de una escuela Addressing him: Talking about him: Question 7 with 2 blankstres chicas Addressing them: Talking about them: Question 8 with 2 blanksun pasajero de autobús Addressing him: Talking about him: Question 9 with 2 blanksJuan Carlos y Felipe Addressing them: Talking about them: Question 10 with 2 blanksuna turista Addressing her: Talking about her .

el señor DíazAddressing himTalking about himQues.docx

toltonkendal

Electrochemical Cells and Cell Potentials Objective: The purpose of this experiment is to create and experiment galvanic cell and collect/interpret data by using a multimeter to describe the flow of electrons. The we g=had to determine how it is calculated by using the formulas given. Procedure: Exercise 1: Construction of a Galvanic Cell 1. Gather all of the supplies listed in the materials list. 2. Use the scissors to cut a strip of the filter paper approximately 1.5 inches in width (1/4 the size of the sheet of filter paper). 3. Cut a strip of filter paper and fold the strip of filter paper in half (widthwise) and then in half again. 4. Folding the filter paper in half and then in half again and put on the safety gloves and goggles. 5. Create the salt bridge by carefully winding the folded filter paper into a circle so that it fits into the bottom of the 9 oz. plastic cup. Add the potassium chloride to the cup with the filter paper until the paper is completely covered with the potassium chloride. 6. Folded filter paper in cup. The potassium chloride is added to the cup to cover the filter paper. 7. Allow the paper to soak up the potassium chloride for a minimum of 10 minutes or until you are ready to add it to the galvanic cell, as described later in the experiment. 8. Place the 2 glass beakers on a table. Add approximately 45 ml of zinc sulfate (approximately ½ of the bottle) to one of the beakers. To the second beaker, add approximately 45 ml of copper sulfate. 9. Pick up a fresh strip of zinc and insert 1 end of it into the copper sulfate solution. After approximately 5 seconds, remove the zinc from the copper sulfate and place it on a piece of paper towel.10. Pick up a fresh strip of copper and insert 1 end of it into the zinc sulfate solution. After approximately 5 seconds, remove the copper from the zinc sulfate and place it on the piece of paper towel.11. Metal in solutions. A. Zinc being inserted into copper sulfate. B. Copper being inserted into zinc sulfate and observe the 2 metal strips and record observations in Data Table 1 in your Lab Report Assistant. 12. From the observations, determine which of the 2 reactions is spontaneous. Record this in the observations section of Data Table 1. 13. Set up the voltmeter as follows; a. Make sure the on/off switch of the voltmeter is in the "off" position. b. Place the end of the black probe into the bottom right hole of the voltmeter. c. Place the end of the red probe into the hole directly above the location of the black probe. d. Turn the voltage dial so that the arrow end of the dial is pointing to 20 DCV. e. Add 1 jumper cable clip to each end of the probes. It does not matter what color jumper cable clips are provided in your kit, or which color is attached to either probe. 14. Put the salt bridge into place by submerging 1 end on the copper sulfate and the other end in the zinc sulfate. Adjust the beakers as necessary so that the salt bridge does not sink between the beakers. .

Electrochemical Cells and Cell PotentialsObjective The pu.docx

toltonkendal

Electricity Restructuring and Competition Electricity MarketsTraditional Organization of Electricity Provision in U.S.Govt regulated, vertically integrated public utilitiesLast 25 YearsWave of restructuring and introduction of electricity trading and competition across U.S. and other nationsNow large-scale wholesale electricity markets operate across many parts of U.S. Factors leading to restructuring & deregulation Prior track record of deregulating energy markets and other industries once considered natural monopolies telecomm, airlines, railroads, High electricity prices in spite of regulation In U.S. states such as NY, California, New England In other countries, such as U.K. As the U.S. electricity transmission grid was built out in the 2nd half of 20th century, electric utilities started buying and selling energy from each other This illustrated feasibility of trading energy across the grid in markets Political Push 2nd Bush President Electricity Restructuring – A How-To GuideUnbundle generation from transmission and distributionIt’s important to allow multiple business firms to own and operate generation plants (independent power producers (IPPs) or merchant generators)This may require forcing some vertically integrated IOUs to divest some of their generation assets Electricity Restructuring – A How-To GuideEstablish an organized market for wholesale electricity tradingSellers are firms like merchant generators that inject energy into the gridBuyers are retail distributors and industrial users that withdraw energy from the gridMarket rules might include an advance-trading (e.g., day-ahead) market as well as a real-time balancing market Electricity Restructuring – A How-To GuideSet up an organization to manage and coordinate energy flows over the gridThis could be an independent system operator (ISO) or a regional transmission organization (RTO)Key responsibilitiesBalance energy supply and demand in real timeMaintain system reliabilityCoordinate new transmission investments Wholesale Market Competition Electricity Restructuring – A How-To GuideRetail distributionOwnership and operation of local distribution networks would typically continue as regulated public utilities (natural monopoly rationale)But it is feasible to introduce retail competition via brokers and energy re-sellers who purchase wholesale energy, re-sell it to retail customers, and pay fees to local distribution companies for use of the local network. Wholesale Electricity MarketsLet’s examine a perfect competition model of a short-run (hourly) wholesale electricity marketDemand SideDemand varies hour by hour, as weather conditions and desired electricity usage changeVery price inelastic – most retail customers pay fixed retail pricesSupply SideMost supply comes from fossil fuel generatorsFF supply is driven by cost of generation and capacities of generation units.Generation from renewables is intermittent Fossil Fuel Generation a.

Electricity Restructuringand Competition.docx

toltonkendal

Electrolytes and Minerals Table – Week 5 AssignmentMineralE.docx

toltonkendal

ElectriGov is a government agency whose mission is to supply electric power to various locations in the United States. To accomplish this task, the organization has three line crews of five to ten men whose job it is to install high-voltage power lines. Each crew is highly cohesive, led by a foreman. Moreover, crew members have worked together for many years and have an established pattern for doing their work and solving problems. The work is hard, dirty, and dangerous. Almost all of the men have had a friend who has been seriously injured or killed while on the job. The crews typically work independently, but when there are large projects to complete, they must work together. This can create serious conflicts, since the crews often don’t agree with each other’s approaches to organizing and managing a particular job, and none of the three foremen wants to be subservient to the others. Thus when line crews do large projects together, they tend to compete with one another rather than cooperate. On one project, the conflict became so nasty that one crew failed to inform another crew that the wires were hot at a certain section of the project. This serious safety breach was reported to senior management, who immediately launched an investigation. We, as consultants, were initially asked to serve as part of the team investigating the causes of the safety violations. After the initial investigation, we were asked by ElectriGov’s senior management to “clean up the conflicts” between the crews. The approach we used to help the crews reduce their conflicts was a variation on design A. All three crews were brought together in one room, and the need for an interteam development program was discussed. Each crew was asked to commit to solving the conflicts between themselves and the other crews and to agree to give the program a chance. Once we had their agreement, each crew was then asked to meet separately to list their perceptions of the other crews and the specific problems that they had in working with the others. After meeting separately, the teams came back together and each reported its perceptions of the other crews. In our consulting role, we facilitated the discussion, making sure that each crew’s perceptions were made clear and that each crew described the problematic behaviors of the other crews in concrete, specific terms. As a ground rule, crews were asked to be descriptive and to avoid using emotionally laden language when critiquing the other crews. After each crew presented its perceptions, the other crews could ask questions to clarify points, but the crews were not allowed to debate the validity of the other crews’ perceptions. After each crew aired its views, the crews, together in an open session, were then asked to come up with recommendations to improve the relationships. Their suggestions were listed on large poster boards in the room. The crews discussed how they might do more advanced planning on the larger projects to deter.

ElectriGov is a government agency whose mission is to supply ele.docx

toltonkendal

Plus de toltonkendal (20)

Elements of Music Report InstrumentsFor the assignment on the el.docx

Elements of GenreAfter watching three of the five .docx

Elements of DesignDuring the process of envisioning and designing .docx

Elements of Critical Thinking [WLOs 2, 3, 4] [CLOs 2, 3, 4]P.docx

Elements of DesignDuring the process of envisioning and design.docx

Elements of a contact due 16 OctRead the Case Campbell Soup Co. v..docx

Elements for analyzing mise en sceneIdentify the components of.docx

Elements in the same row have the same number of () levelsWhi.docx

ELEG 421 Control Systems Transient and Steady State .docx

Element 010 ASSIGNMENT 3000 WORDS (100)Task Individual assign.docx

ELEG 320L – Signals & Systems Laboratory Dr. Jibran Khan Yous.docx

Electronic Media PresentationChoose two of the following.docx

Electronic copy available at httpssrn.comabstract=2161742.docx

Electronic Health RecordsInstructionsAs implementation of e.docx

Electronic copy available at httpssrn.comabstract=2155540.docx

el señor DíazAddressing himTalking about himQues.docx

Electrochemical Cells and Cell PotentialsObjective The pu.docx

Electricity Restructuringand Competition.docx

Electrolytes and Minerals Table – Week 5 AssignmentMineralE.docx

ElectriGov is a government agency whose mission is to supply ele.docx

Dernier

Unit-IV- Pharma. Marketing Channels.pptx

VishalSingh1417

Salient Features of India constitution especially power and functions

KarakKing

ICT Role in 21st Century Education & its Challenges.pptx

AreebaZafar22

Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...

christianmathematics

Dyslexia AI Workshop for Slideshare.pptx

callscotland1987

UGC NET Paper 1 Mathematical Reasoning & Aptitude.pdf

Nirmal Dwivedi

Spatium Project Simulation student brief

Association for Project Management

Mixin Classes in Odoo 17 How to Extend Models Using Mixin Classes

Celine George

Holdier Curriculum Vitae (April 2024).pdf

agholdier

Python Notes for mca i year students osmania university.docx

Ramakrishna Reddy Bijjam

Sociology 101 Demonstration of Learning Exhibit

jbellavia9

Basic Civil Engineering notes first year Notes Building notes Selection of site for Building Layout of a Building What is Burjis, Mutam Building Bye laws Basic Concept of sunlight ventilation in building National Building Code of India Set back or building line Types of Buildings Floor Space Index (F.S.I) Institutional Vs Educational Building Components & function Sills, Lintels, Cantilever Doors, Windows and Ventilators Types of Foundation AND THEIR USES Plinth Area Shallow and Deep Foundation Super Built-up & carpet area Floor Area Ratio (F.A.R) RCC Reinforced Cement Concrete RCC VS PCC

Basic Civil Engineering first year Notes- Chapter 4 Building.pptx

Denish Jangid

Key note speaker Neum_Admir Softic_ENG.pdf

Admir Softic

Accessible Digital Futures project (20/03/2024)

Jisc

Fostering Friendships - Enhancing Social Bonds in the Classroom

Pooky Knightsmith

Unit-V; Pricing (Pharma Marketing Management).pptx

VishalSingh1417

Micro-Scholarship, What it is, How can it help me.pdf

Poh-Sun Goh

Klinik_ Apotek Onlin 085657271886 Solusi Menggugurkan Masalah Kehamilan Anda Jual Obat Aborsi Asli KLINIK ABORSI TERPEECAYA _ Jual Obat Aborsi Cytotec Misoprostol Asli 100% Ampuh Hanya 3 Jam Langsung Gugur || OBAT PENGGUGUR KANDUNGAN AMPUH MANJUR OBAT ABORSI OLINE" APOTIK Jual Obat Cytotec, Gastrul, Gynecoside Asli Ampuh. JUAL ” Obat Aborsi Tuntas | Obat Aborsi Manjur | Obat Aborsi Ampuh | Obat Penggugur Janin | Obat Pencegah Kehamilan | Obat Pelancar Haid | Obat terlambat Bulan | Ciri Obat Aborsi Asli | Obat Telat Bulan | Pil Aborsi Asli | Cara Menggugurkan Konten | Cara Aborsi Tuntas | Harga Obat Aborsi Asli | Pil Aborsi | Jual Obat Aborsi Cytotec | Cara Aborsi Sendiri | Cara Aborsi Usia 1 Bulan | Cara Aborsi Usia 2 Tahun | Cara Aborsi Usia 3 Bulan | Obat Aborsi Usia 4 Bulan | Cara Abrasi Usia 5 Bulan | Cara Menggugurkan Konten | Kandungan Obat Penggugur | Cara Menghitung Usia Konten | Cara Mengatasi Terlambat Bulan | Penjual Obat Aborsi Asli | Obat Aborsi Garansi | Kandungan Obat Peluntur | Obat Telat Datang Bulan | Obat Telat Haid | Obat Aborsi Paling Murah | Klinik Jual Obat Aborsi | Jual Pil Cytotec | Apotik Jual Obat Aborsi | Kandungan Dokter Abrasi | Cara Aborsi Cepat | Jual Obat Aborsi Bergaransi | Jual Obat Cytotec Asli | Obat Aborsi Aman Manjur | Obat Misoprostol Cytotec Asli. "APA ITU ABORSI" “Aborsi Adalah dengan membendung hormon yang di perlukan untuk mempertahankan kehamilan yaitu hormon progesteron, karena hormon ini dibendung, maka jalur kehamilan mulai membuka dan leher rahim menjadi melunak,sehingga mengeluarkan darah yang merupakan tanda bahwa obat telah bekerja || maksimal 1 jam obat diminum || PENJELASAN OBAT ABORSI USIA 1 _7 BULAN Pada usia kandungan ini, pasien akan merasakan sakit yang sedikit tidak berlebihan || sekitar 1 jam ||. namun hanya akan terjadi pada saatdarah keluar merupakan pertanda menstruasi. Hal ini dikarenakan pada usiakandungan 3 bulan,janin sudah terbentuk sebesar kepalan tangan orang dewasa. Cara kerja obat aborsi : JUAL OBAT ABORSI AMPUH dosis 3 bulan secara umum sama dengan cara kerja || DOSIS OBAT ABORSI 2 bulan”, hanya berbedanya selain mengisolasijanin juga menghancurkan janin dengan formula methotrexate dikandungdidalamnya. Formula methotrexate ini sangat ampuh untuk menghancurkan janinmenjadi serpihan-serpihan kecil akan sangat berguna pada saat dikeluarkan nanti. APA ALASAN WANITA MELAKUKAN ABORSI? Aborsi di lakukan wanita hamil baik yang sudah menikah maupun belum menikah dengan berbagai alasan , akan tetapi alasan yang utama adalah alasan-alasan non medis (termasuk aborsi sendiri / di sengaja/ buatan] MELAYANI PEMESANAN OBAT ABORSI SETIAP HARI, SIAP KIRIM KESELURUH KOTA BESAR DI INDONESIA DAN LUAR NEGERI. HUBUNGI PEMESANAN LEBIH NYAMAN VIA WA/: 085657271886

Jual Obat Aborsi Hongkong ( Asli No.1 ) 085657271886 Obat Penggugur Kandungan...

ZurliaSoop

How to Manage Global Discount in Odoo 17 POS

Celine George

The basics of sentences session 3pptx.pptx

heathfieldcps1

Dernier (20)

Unit-IV- Pharma. Marketing Channels.pptx

Salient Features of India constitution especially power and functions

ICT Role in 21st Century Education & its Challenges.pptx

Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...

Dyslexia AI Workshop for Slideshare.pptx

UGC NET Paper 1 Mathematical Reasoning & Aptitude.pdf

Spatium Project Simulation student brief

Mixin Classes in Odoo 17 How to Extend Models Using Mixin Classes

Holdier Curriculum Vitae (April 2024).pdf

Python Notes for mca i year students osmania university.docx

Sociology 101 Demonstration of Learning Exhibit

Basic Civil Engineering first year Notes- Chapter 4 Building.pptx

Key note speaker Neum_Admir Softic_ENG.pdf

Accessible Digital Futures project (20/03/2024)

Fostering Friendships - Enhancing Social Bonds in the Classroom

Unit-V; Pricing (Pharma Marketing Management).pptx

Micro-Scholarship, What it is, How can it help me.pdf

Jual Obat Aborsi Hongkong ( Asli No.1 ) 085657271886 Obat Penggugur Kandungan...

How to Manage Global Discount in Odoo 17 POS

The basics of sentences session 3pptx.pptx