First of all, the image is missing.. Still your very first questio.pdfankkitextailes
a). Treat the benzoic acid-sand mixture with 1 M NaOH solution. Only the benzoic acid will
dissolve. Filter the mixture to remove the sand. Then, add concentrated acid (like 6 M HCl) to
the solution - this will cause benzoic acid to precipitate. Filter this mixture to obtain the pure
benzoic acid. b). Solvent pair recrystallizations make use of the fact the the compound of
interest is relatively soluble in one solvent, and relatively insoluble in the other. Thus, a saturated
solution can be made simply by varying the ratio of the two solvents, rather than slowly adding
small portions of a single solvent to a solid. When the ethanol - water mixtures become cloudy,
it indicates the the compound is no longer soluble, and too much of the \"bad\" solvent (the one
in which the compound is less soluble) has been added. Addition of more of the \"good\" solvent
will remove the cloudiness.
Solution
a). Treat the benzoic acid-sand mixture with 1 M NaOH solution. Only the benzoic acid will
dissolve. Filter the mixture to remove the sand. Then, add concentrated acid (like 6 M HCl) to
the solution - this will cause benzoic acid to precipitate. Filter this mixture to obtain the pure
benzoic acid. b). Solvent pair recrystallizations make use of the fact the the compound of
interest is relatively soluble in one solvent, and relatively insoluble in the other. Thus, a saturated
solution can be made simply by varying the ratio of the two solvents, rather than slowly adding
small portions of a single solvent to a solid. When the ethanol - water mixtures become cloudy,
it indicates the the compound is no longer soluble, and too much of the \"bad\" solvent (the one
in which the compound is less soluble) has been added. Addition of more of the \"good\" solvent
will remove the cloudiness..
a. FunctionFunctions in SQL server are reusable. They can accept i.pdfankkitextailes
M2X3 -----> 2M+ + 3X- Convert to molarity 2.1 x 10^-17grams/L *1mol/320g =
6.563 x 10^-20 M There is a 1:2 ratio for M2X3 and 2M+ So twice the amount of concentration
will form 6.563 x 10^-20 * 2= 1.31 x 10^-19M There is a 1:3 ratio for M2X3 and 3X- So 6.563 x
10^-20 *3 = 1.96 x 10^-19 Ksp = [M+]^2*[X-]^3 = (1.31x10^-19)^2(1.96x10^-19)^3 = 1.31 x
10^-94. The very small # makes sense. Hope this helped
Solution
M2X3 -----> 2M+ + 3X- Convert to molarity 2.1 x 10^-17grams/L *1mol/320g =
6.563 x 10^-20 M There is a 1:2 ratio for M2X3 and 2M+ So twice the amount of concentration
will form 6.563 x 10^-20 * 2= 1.31 x 10^-19M There is a 1:3 ratio for M2X3 and 3X- So 6.563 x
10^-20 *3 = 1.96 x 10^-19 Ksp = [M+]^2*[X-]^3 = (1.31x10^-19)^2(1.96x10^-19)^3 = 1.31 x
10^-94. The very small # makes sense. Hope this helped.
7 steps are required as 9 is the 7th element and the search is linea.pdfankkitextailes
henry\'s law states that vapour pressure of a component = mole fraction x vapour
pressure in pure state. vapor pressure of br2 = 0.05 x 122.36 torr vapor pressure of CCl4 = 0.95 x
33.85 torr total vapor pressure = 0.05 x 122.36 + 0.95 x 33.85 torr
Solution
henry\'s law states that vapour pressure of a component = mole fraction x vapour
pressure in pure state. vapor pressure of br2 = 0.05 x 122.36 torr vapor pressure of CCl4 = 0.95 x
33.85 torr total vapor pressure = 0.05 x 122.36 + 0.95 x 33.85 torr.
Everything but Ba++ and SO4-- are spectators.........So option e. Na+ and I-
Solution
Everything but Ba++ and SO4-- are spectators.........So option e. Na+ and I-.
First of all, the image is missing.. Still your very first questio.pdfankkitextailes
a). Treat the benzoic acid-sand mixture with 1 M NaOH solution. Only the benzoic acid will
dissolve. Filter the mixture to remove the sand. Then, add concentrated acid (like 6 M HCl) to
the solution - this will cause benzoic acid to precipitate. Filter this mixture to obtain the pure
benzoic acid. b). Solvent pair recrystallizations make use of the fact the the compound of
interest is relatively soluble in one solvent, and relatively insoluble in the other. Thus, a saturated
solution can be made simply by varying the ratio of the two solvents, rather than slowly adding
small portions of a single solvent to a solid. When the ethanol - water mixtures become cloudy,
it indicates the the compound is no longer soluble, and too much of the \"bad\" solvent (the one
in which the compound is less soluble) has been added. Addition of more of the \"good\" solvent
will remove the cloudiness.
Solution
a). Treat the benzoic acid-sand mixture with 1 M NaOH solution. Only the benzoic acid will
dissolve. Filter the mixture to remove the sand. Then, add concentrated acid (like 6 M HCl) to
the solution - this will cause benzoic acid to precipitate. Filter this mixture to obtain the pure
benzoic acid. b). Solvent pair recrystallizations make use of the fact the the compound of
interest is relatively soluble in one solvent, and relatively insoluble in the other. Thus, a saturated
solution can be made simply by varying the ratio of the two solvents, rather than slowly adding
small portions of a single solvent to a solid. When the ethanol - water mixtures become cloudy,
it indicates the the compound is no longer soluble, and too much of the \"bad\" solvent (the one
in which the compound is less soluble) has been added. Addition of more of the \"good\" solvent
will remove the cloudiness..
a. FunctionFunctions in SQL server are reusable. They can accept i.pdfankkitextailes
M2X3 -----> 2M+ + 3X- Convert to molarity 2.1 x 10^-17grams/L *1mol/320g =
6.563 x 10^-20 M There is a 1:2 ratio for M2X3 and 2M+ So twice the amount of concentration
will form 6.563 x 10^-20 * 2= 1.31 x 10^-19M There is a 1:3 ratio for M2X3 and 3X- So 6.563 x
10^-20 *3 = 1.96 x 10^-19 Ksp = [M+]^2*[X-]^3 = (1.31x10^-19)^2(1.96x10^-19)^3 = 1.31 x
10^-94. The very small # makes sense. Hope this helped
Solution
M2X3 -----> 2M+ + 3X- Convert to molarity 2.1 x 10^-17grams/L *1mol/320g =
6.563 x 10^-20 M There is a 1:2 ratio for M2X3 and 2M+ So twice the amount of concentration
will form 6.563 x 10^-20 * 2= 1.31 x 10^-19M There is a 1:3 ratio for M2X3 and 3X- So 6.563 x
10^-20 *3 = 1.96 x 10^-19 Ksp = [M+]^2*[X-]^3 = (1.31x10^-19)^2(1.96x10^-19)^3 = 1.31 x
10^-94. The very small # makes sense. Hope this helped.
7 steps are required as 9 is the 7th element and the search is linea.pdfankkitextailes
henry\'s law states that vapour pressure of a component = mole fraction x vapour
pressure in pure state. vapor pressure of br2 = 0.05 x 122.36 torr vapor pressure of CCl4 = 0.95 x
33.85 torr total vapor pressure = 0.05 x 122.36 + 0.95 x 33.85 torr
Solution
henry\'s law states that vapour pressure of a component = mole fraction x vapour
pressure in pure state. vapor pressure of br2 = 0.05 x 122.36 torr vapor pressure of CCl4 = 0.95 x
33.85 torr total vapor pressure = 0.05 x 122.36 + 0.95 x 33.85 torr.
Everything but Ba++ and SO4-- are spectators.........So option e. Na+ and I-
Solution
Everything but Ba++ and SO4-- are spectators.........So option e. Na+ and I-.
4P + 5O2 = P4O10 molar ratio of P to O = 45 mole.pdfankkitextailes
4P + 5O2 = P4O10 molar ratio of P to O = 4:5 moles of O = (0.221/4) x 5 = 0.276
mol
Solution
4P + 5O2 = P4O10 molar ratio of P to O = 4:5 moles of O = (0.221/4) x 5 = 0.276
mol.
1. “Internal auditors support managements efforts to establish a.pdfankkitextailes
1. “Internal auditors support management\'s efforts to establish a culture that embraces ethics,
honesty, and integrity. They assist management with the evaluation of internal controls used to
detect or mitigate fraud, evaluate the organization\'s assessment of fraud risk, and are involved in
any fraud investigations.The audit committee is responsible for overseeing controls to prevent or
detect management fraud.
Internal Audit standards regarding role of Internal Auditor with respect to fraud risk management
1.IIA Standard 1200: Proficiency and Due Professional Care 1210.A2 – “Internal auditors must
have sufficient knowledge to evaluate the risk of fraud and the manner in which it is managed by
the organization, but are not expected to have the expertise of a person whose primary
responsibility is detecting and investigating fraud”.
2.IIA Standard 1220: Due Professional Care 1220.A1 – “Internal auditors must exercise due
professional care by considering the: … Probability of significant errors, fraud, or
noncompliance.
3.IIA Standard 2060: Reporting to Senior Management and the Board “The chief audit executive
(CAE) must report periodically to senior management and the board on the internal audit
activity’s purpose, authority, responsibility, and performance relative to its plan. Reporting must
also include significant risk exposures and control issues, including fraud risks, governance
issues, and other matters needed or requested by senior management and the board.”
4.IIA Standard 2120: Risk Management 2120.A2 – “The internal audit activity must evaluate the
potential for the occurrence of fraud and how the organization manages fraud risk.”
5.IIA Standard 2210: Engagement Objectives 2210.A2 – “Internal auditors must consider the
probability of significant errors, fraud, noncompliance, and other exposures when developing the
engagement objectives.
2.)Crazy Eddie Inc. was a family-run, consumer electronics chain that went public in 1984 and
built itself on a massive fraud scheme. They employed a wide variety of deceptive practices and
outright fraud, and conspired to fool their auditors over the course of many years (which is all
described in fascinating detail on Sam\'s website). In 1987, they experienced a hostile takeover
from some investors. And since that time, Sam has become an expert witness, served his jail
time, and regularly speaks about white collar fraud. The fundamental problem at Crazy Eddie
was a tone at the top at the company from the beginning. Even while Sam was a college
accounting student he was helping the family skim money off the business and cook the books.
The company started as a small family business, so they would be able generally to trust each
other and many people were doing jobs for which they were not really qualified.
Internal control was pivotal in uncovering the scandal
1.Use a system of checks and balances to ensure no one person has control over all parts of a
financial transaction.
2.Reconcile agency ba.
z= e^(1-i3) = e.e^(-i3)we know that e^-ix = cos x - i sin xso .pdfankkitextailes
z= e^(1-i/3) = e.e^(-i/3)
we know that e^-ix = cos x - i sin x
so e^(-i/3) = cos /3 - i sin/3 = 1/2 - i3 /2
real part of e.e^(-i/3) = e/2
imaginary part = - e3 /2
Solution
z= e^(1-i/3) = e.e^(-i/3)
we know that e^-ix = cos x - i sin x
so e^(-i/3) = cos /3 - i sin/3 = 1/2 - i3 /2
real part of e.e^(-i/3) = e/2
imaginary part = - e3 /2.
x = 1; maxn = 50; epsilon = 1; xval = x; n = 0; start pro.pdfankkitextailes
x = 1;
maxn = 50;
epsilon = 1;
xval = x;
n = 0;
%start processing here
while epsilon>=1e-5 & n<=maxn
y = x - (e.^(-cos(x)));
xval = [xval;y];
epsilon = abs(y-x);
x=y;
n=n+1;
end
% print root here
x
Solution
x = 1;
maxn = 50;
epsilon = 1;
xval = x;
n = 0;
%start processing here
while epsilon>=1e-5 & n<=maxn
y = x - (e.^(-cos(x)));
xval = [xval;y];
epsilon = abs(y-x);
x=y;
n=n+1;
end
% print root here
x.
Wild typeDeletion MutantApart from these bands, probe will sho.pdfankkitextailes
Wild type:
Deletion Mutant:
Apart from these bands, probe will show
Wild type:
Deletion Mutant:Number OF BANDSSIZE OF BANDS2 bands1000BPs AND 1500 BPs
Solution
Wild type:
Deletion Mutant:
Apart from these bands, probe will show
Wild type:
Deletion Mutant:Number OF BANDSSIZE OF BANDS2 bands1000BPs AND 1500 BPs.
The Fraud triangle is a framework designed to explain the reasoning .pdfankkitextailes
The Fraud triangle is a framework designed to explain the reasoning behind a worker’s decision
to commit workplace fraud. The three stages, categorised by the effect on the individual, can be
summarised as pressure, opportunity and rationalisation. Broken down, they are:
Step 1 – the pressure on the individual – is the motivation behind the crime and can be either
personal financial pressure, such as debt problems, or workplace debt problems, such as a
shortfall in revenue. The pressure is seen by the individual as unsolvable by orthodox, legal,
sanctioned routes and unshareable with others who may be able to offer assistance. A common
example of a perceived unshareable financial problem is gambling debt. Maintenance of a
lifestyle is another common example.
Step 2 – the opportunity to commit fraud – is the means by which the individual will defraud the
organisation. In this stage the worker sees a clear course of action by which they can abuse their
position to solve the perceived unshareable financial problem in a way that – again, perceived by
them – is unlikely to be discovered. In many cases the ability to solve the problem in secret is
key to the perception of a viable opportunity.
Step 3 – the ability rationalise the crime – is the final stage in the fraud triangle. This is a
cognitive stage and requires the fraudster to be able to justify the crime in a way that is
acceptable to his or her internal moral compass. Most fraudsters are first-time criminals and do
not see themselves as criminals, but rather a victim of circumstance. Rationalisations are often
based on external factors, such as a need to take care of a family, or a dishonest employer which
is seen to minimise or mitigate the harm done by the crime.
The key to dealing with fraud is to focus on prevention. It is cheaper and more effective to
prevent fraud from happening than it is to try to detect the crime. By the time the fraud is
discovered, the money is gone and chances are slim to none that it will be recovered.
Additionally, it is costly and time consuming to investigate a fraud.
Perhaps the most important lesson of the fraud triangle is that all three factors must normally be
present for fraud to occur. If any one of the three elements is missing, fraud may not occur.
The key to dealing with fraud is to focus on the prevention of opportunity. It is much less
expensive and more effective to prevent fraud from happening than it is to try to detect the crime.
Solution
The Fraud triangle is a framework designed to explain the reasoning behind a worker’s decision
to commit workplace fraud. The three stages, categorised by the effect on the individual, can be
summarised as pressure, opportunity and rationalisation. Broken down, they are:
Step 1 – the pressure on the individual – is the motivation behind the crime and can be either
personal financial pressure, such as debt problems, or workplace debt problems, such as a
shortfall in revenue. The pressure is seen by the indiv.
SumNumbers.java import java.util.Scanner;public class SumNumbe.pdfankkitextailes
SumNumbers.java
import java.util.Scanner;
public class SumNumbers {
/**
* @param args
*/
public static void main(String[] args) {
// TODO Auto-generated method stub
Scanner scan = new Scanner(System.in);
int sum = 0;
while(true){
System.out.println(\"Enter integer:\");
int n = scan.nextInt();
if(n == -1){
break;
}
sum = sum + n;
}
System.out.println(\"The sum is \"+sum);
}
}
Output:
Enter integer:
1
Enter integer:
2
Enter integer:
3
Enter integer:
4
Enter integer:
5
Enter integer:
6
Enter integer:
7
Enter integer:
8
Enter integer:
9
Enter integer:
-1
The sum is 45
Solution
SumNumbers.java
import java.util.Scanner;
public class SumNumbers {
/**
* @param args
*/
public static void main(String[] args) {
// TODO Auto-generated method stub
Scanner scan = new Scanner(System.in);
int sum = 0;
while(true){
System.out.println(\"Enter integer:\");
int n = scan.nextInt();
if(n == -1){
break;
}
sum = sum + n;
}
System.out.println(\"The sum is \"+sum);
}
}
Output:
Enter integer:
1
Enter integer:
2
Enter integer:
3
Enter integer:
4
Enter integer:
5
Enter integer:
6
Enter integer:
7
Enter integer:
8
Enter integer:
9
Enter integer:
-1
The sum is 45.
The absorptivity, The transmissivity and reflectivity are given by.pdfankkitextailes
The absorptivity, The transmissivity and reflectivity are given by:
If the amounts of radiation energy absorbed, reflected, and transmitted when radiation strikes a
surface are measured in percentage of the total energy in the incident electromagnetic waves.
The total energy would be divided into three groups, they are called absorptivity (), reflectivity ()
and transmissivity (t).
+ + t = 1 (1)
A body is considered transparent if it can transmit some of the radiation waves falling on its
surface. If electromagnetic waves are not transmitted through the substance it is therefore called
opaque. When radiation waves hit the surface of an opaque body, some of the waves are
reflected back while the other waves are absorbed by a thin layer of the material close to the
surface. For engineering purposes all materials are thick enough that they can be considered
opaque reducing equation 1 to:
+ = 1 (2)
Reflectivity deviates from the other properties in that it is bidirectional in nature. In other words,
this property depends on the direction of the incident of radiation as well as the direction of the
reflection. Therefore, the reflected rays of a radiation spectrum incident on a real surface in a
specified direction forms an irregular shape that is not easily predictable. In practice, surfaces are
assumed to reflect in a perfectly specular or diffuse manner. In a specular reflection, the angles
of reflection and incidence are equal. In diffuse reflection, radiation is reflected equally in all
directions. Reflection from smooth and polished surfaces can be assumed to be specular
reflection, whereas reflection from rough surfaces approximates diffuse reflection.
Considering this given object as an opaque substance, The value of transmissivity is zero
So, the Absorptivity + Reflectivity = 1---(3)
Assuming 100% emmitance of the absorbed body
We get the value of Absorptivity = value of Emmisivity = 0.7
So, from equation (3)
Reflectivity = 1 - Absorptivity
Reflectivity = 1 - 0.7 = 0.3
Heat Rate Reflected per unit area is given by:
Gref = G * Reflectivity = 1000 *0.3 = 300 W/m2
So, The Rate Reflected per unit area is Gref 300 W/m2
Solution
The absorptivity, The transmissivity and reflectivity are given by:
If the amounts of radiation energy absorbed, reflected, and transmitted when radiation strikes a
surface are measured in percentage of the total energy in the incident electromagnetic waves.
The total energy would be divided into three groups, they are called absorptivity (), reflectivity ()
and transmissivity (t).
+ + t = 1 (1)
A body is considered transparent if it can transmit some of the radiation waves falling on its
surface. If electromagnetic waves are not transmitted through the substance it is therefore called
opaque. When radiation waves hit the surface of an opaque body, some of the waves are
reflected back while the other waves are absorbed by a thin layer of the material close to the
surface. For engineering purposes all materials are thick .
Curly brackets mean exactly the same as ordinary parentheses in thi.pdfankkitextailes
Curly brackets mean exactly the same as ordinary parentheses in this context (in a few contexts
(, [ and { can all be defined to take a special meaning, but ordinarily they are all different ways
of typesetting).
Cauchy\'s inequality is of the form
Solution
Curly brackets mean exactly the same as ordinary parentheses in this context (in a few contexts
(, [ and { can all be defined to take a special meaning, but ordinarily they are all different ways
of typesetting).
Cauchy\'s inequality is of the form.
Solution (A)Nowadays Sugar is not listed directly by name suga.pdfankkitextailes
Solution
:
(A)Nowadays Sugar is not listed directly by name \"sugar\" on an ingredients list.It is listed by
name like dextrose,high-fructose corn syrup and carob syrup on an ingredient list.These are
called added sugar.Uptake of excess sugar is the main cause of many sugar related diseases like
diabetes.So,manufacturer hide the amount of total sugar added in ingredient by not mentioning it
directly and make it unrecognizable to the public..
RNA sequencing also known as next generation genome sequencing and t.pdfankkitextailes
RNA sequencing also known as next generation genome sequencing and this method of RNA
sequencing using DNAases are useful to detect single nucleotide polymorphism & post-
transcriptional single nucleotide variants. Therefore, this type of sequencing is useful to annotate
forensic genomics. Identifying fusion genes using RNA sequencing has meticulous importance
to study their relationship with cancer genome (through Sanger sequencing). Specific gene
expression studies (mRNA sequence genome) studies used to identify the gene responsible for
the coding of the ion- channel protein expression.
For example: Poliomyelities is the resultant abnormality due to this enterovirus. The RNA
sequencing of the meat product containing virus is additional studies might confirm (or refute)
the genomics of poliovirus -hypothesis that the meat was the source of the poliomyelitis
outbreaks.
Solution
RNA sequencing also known as next generation genome sequencing and this method of RNA
sequencing using DNAases are useful to detect single nucleotide polymorphism & post-
transcriptional single nucleotide variants. Therefore, this type of sequencing is useful to annotate
forensic genomics. Identifying fusion genes using RNA sequencing has meticulous importance
to study their relationship with cancer genome (through Sanger sequencing). Specific gene
expression studies (mRNA sequence genome) studies used to identify the gene responsible for
the coding of the ion- channel protein expression.
For example: Poliomyelities is the resultant abnormality due to this enterovirus. The RNA
sequencing of the meat product containing virus is additional studies might confirm (or refute)
the genomics of poliovirus -hypothesis that the meat was the source of the poliomyelitis
outbreaks..
option b ,here return type is int and the Logical operator OR us.pdfankkitextailes
option \"b\" ,here return type is int and the Logical operator OR used are appropriate but not in
other cases.
Solution
option \"b\" ,here return type is int and the Logical operator OR used are appropriate but not in
other cases..
RbF because lattice energy is inversly proportio.pdfankkitextailes
RbF because lattice energy is inversly proportional to the radii of the ions present..
Solution
RbF because lattice energy is inversly proportional to the radii of the ions present...
Pete Best (born 24 November 1941) is a British mu.pdfankkitextailes
Pete Best (born 24 November 1941) is a British musician, principally known as the
original drummer in the Beatles. He was born in the city of Madras, then part of British India.
After Best\'s mother, Mona Best (1924–1988), moved to Liverpool in 1945, she opened The
Casbah Coffee Club in the cellar of the Bests\' large house in Liverpool. It became very popular
with British youths, having a membership of over 1,000. The Beatles (at the time known as the
Quarrymen) played some of their first concerts at the club. Best played there with the Beatles as
well as his first band, the Black Jacks. The Beatles invited Best to join on 12 August 1960, on
the eve of the group\'s first Hamburg season of club dates. He was eventually replaced by Ringo
Starr on 16 August 1962, when the group\'s manager, Brian Epstein, dismissed Best under the
direction of John Lennon, Paul McCartney, and George Harrison, following their first recording
session at Abbey Road Studios. After working in a number of commercially unsuccessful groups
Best gave up the music industry to work as a civil servant for twenty years, before starting the
Pete Best Band. He has been married for over 45 years to Kathy Best; they have two daughters
and four grandchildren.
Solution
Pete Best (born 24 November 1941) is a British musician, principally known as the
original drummer in the Beatles. He was born in the city of Madras, then part of British India.
After Best\'s mother, Mona Best (1924–1988), moved to Liverpool in 1945, she opened The
Casbah Coffee Club in the cellar of the Bests\' large house in Liverpool. It became very popular
with British youths, having a membership of over 1,000. The Beatles (at the time known as the
Quarrymen) played some of their first concerts at the club. Best played there with the Beatles as
well as his first band, the Black Jacks. The Beatles invited Best to join on 12 August 1960, on
the eve of the group\'s first Hamburg season of club dates. He was eventually replaced by Ringo
Starr on 16 August 1962, when the group\'s manager, Brian Epstein, dismissed Best under the
direction of John Lennon, Paul McCartney, and George Harrison, following their first recording
session at Abbey Road Studios. After working in a number of commercially unsuccessful groups
Best gave up the music industry to work as a civil servant for twenty years, before starting the
Pete Best Band. He has been married for over 45 years to Kathy Best; they have two daughters
and four grandchildren..
NaOH is a strong electrolyte i.e. it is highly so.pdfankkitextailes
NaOH is a strong electrolyte i.e. it is highly soluble in water to give Na+ and OH-
ions. Now in presence of common ions decreases the solubility of sparingly soluble compounds
in water. So Hf(OH)4 will be least soluble in NaOH solution as its solubility is further reduced
and already it is least soluble in water.
Solution
NaOH is a strong electrolyte i.e. it is highly soluble in water to give Na+ and OH-
ions. Now in presence of common ions decreases the solubility of sparingly soluble compounds
in water. So Hf(OH)4 will be least soluble in NaOH solution as its solubility is further reduced
and already it is least soluble in water..
4P + 5O2 = P4O10 molar ratio of P to O = 45 mole.pdfankkitextailes
4P + 5O2 = P4O10 molar ratio of P to O = 4:5 moles of O = (0.221/4) x 5 = 0.276
mol
Solution
4P + 5O2 = P4O10 molar ratio of P to O = 4:5 moles of O = (0.221/4) x 5 = 0.276
mol.
1. “Internal auditors support managements efforts to establish a.pdfankkitextailes
1. “Internal auditors support management\'s efforts to establish a culture that embraces ethics,
honesty, and integrity. They assist management with the evaluation of internal controls used to
detect or mitigate fraud, evaluate the organization\'s assessment of fraud risk, and are involved in
any fraud investigations.The audit committee is responsible for overseeing controls to prevent or
detect management fraud.
Internal Audit standards regarding role of Internal Auditor with respect to fraud risk management
1.IIA Standard 1200: Proficiency and Due Professional Care 1210.A2 – “Internal auditors must
have sufficient knowledge to evaluate the risk of fraud and the manner in which it is managed by
the organization, but are not expected to have the expertise of a person whose primary
responsibility is detecting and investigating fraud”.
2.IIA Standard 1220: Due Professional Care 1220.A1 – “Internal auditors must exercise due
professional care by considering the: … Probability of significant errors, fraud, or
noncompliance.
3.IIA Standard 2060: Reporting to Senior Management and the Board “The chief audit executive
(CAE) must report periodically to senior management and the board on the internal audit
activity’s purpose, authority, responsibility, and performance relative to its plan. Reporting must
also include significant risk exposures and control issues, including fraud risks, governance
issues, and other matters needed or requested by senior management and the board.”
4.IIA Standard 2120: Risk Management 2120.A2 – “The internal audit activity must evaluate the
potential for the occurrence of fraud and how the organization manages fraud risk.”
5.IIA Standard 2210: Engagement Objectives 2210.A2 – “Internal auditors must consider the
probability of significant errors, fraud, noncompliance, and other exposures when developing the
engagement objectives.
2.)Crazy Eddie Inc. was a family-run, consumer electronics chain that went public in 1984 and
built itself on a massive fraud scheme. They employed a wide variety of deceptive practices and
outright fraud, and conspired to fool their auditors over the course of many years (which is all
described in fascinating detail on Sam\'s website). In 1987, they experienced a hostile takeover
from some investors. And since that time, Sam has become an expert witness, served his jail
time, and regularly speaks about white collar fraud. The fundamental problem at Crazy Eddie
was a tone at the top at the company from the beginning. Even while Sam was a college
accounting student he was helping the family skim money off the business and cook the books.
The company started as a small family business, so they would be able generally to trust each
other and many people were doing jobs for which they were not really qualified.
Internal control was pivotal in uncovering the scandal
1.Use a system of checks and balances to ensure no one person has control over all parts of a
financial transaction.
2.Reconcile agency ba.
z= e^(1-i3) = e.e^(-i3)we know that e^-ix = cos x - i sin xso .pdfankkitextailes
z= e^(1-i/3) = e.e^(-i/3)
we know that e^-ix = cos x - i sin x
so e^(-i/3) = cos /3 - i sin/3 = 1/2 - i3 /2
real part of e.e^(-i/3) = e/2
imaginary part = - e3 /2
Solution
z= e^(1-i/3) = e.e^(-i/3)
we know that e^-ix = cos x - i sin x
so e^(-i/3) = cos /3 - i sin/3 = 1/2 - i3 /2
real part of e.e^(-i/3) = e/2
imaginary part = - e3 /2.
x = 1; maxn = 50; epsilon = 1; xval = x; n = 0; start pro.pdfankkitextailes
x = 1;
maxn = 50;
epsilon = 1;
xval = x;
n = 0;
%start processing here
while epsilon>=1e-5 & n<=maxn
y = x - (e.^(-cos(x)));
xval = [xval;y];
epsilon = abs(y-x);
x=y;
n=n+1;
end
% print root here
x
Solution
x = 1;
maxn = 50;
epsilon = 1;
xval = x;
n = 0;
%start processing here
while epsilon>=1e-5 & n<=maxn
y = x - (e.^(-cos(x)));
xval = [xval;y];
epsilon = abs(y-x);
x=y;
n=n+1;
end
% print root here
x.
Wild typeDeletion MutantApart from these bands, probe will sho.pdfankkitextailes
Wild type:
Deletion Mutant:
Apart from these bands, probe will show
Wild type:
Deletion Mutant:Number OF BANDSSIZE OF BANDS2 bands1000BPs AND 1500 BPs
Solution
Wild type:
Deletion Mutant:
Apart from these bands, probe will show
Wild type:
Deletion Mutant:Number OF BANDSSIZE OF BANDS2 bands1000BPs AND 1500 BPs.
The Fraud triangle is a framework designed to explain the reasoning .pdfankkitextailes
The Fraud triangle is a framework designed to explain the reasoning behind a worker’s decision
to commit workplace fraud. The three stages, categorised by the effect on the individual, can be
summarised as pressure, opportunity and rationalisation. Broken down, they are:
Step 1 – the pressure on the individual – is the motivation behind the crime and can be either
personal financial pressure, such as debt problems, or workplace debt problems, such as a
shortfall in revenue. The pressure is seen by the individual as unsolvable by orthodox, legal,
sanctioned routes and unshareable with others who may be able to offer assistance. A common
example of a perceived unshareable financial problem is gambling debt. Maintenance of a
lifestyle is another common example.
Step 2 – the opportunity to commit fraud – is the means by which the individual will defraud the
organisation. In this stage the worker sees a clear course of action by which they can abuse their
position to solve the perceived unshareable financial problem in a way that – again, perceived by
them – is unlikely to be discovered. In many cases the ability to solve the problem in secret is
key to the perception of a viable opportunity.
Step 3 – the ability rationalise the crime – is the final stage in the fraud triangle. This is a
cognitive stage and requires the fraudster to be able to justify the crime in a way that is
acceptable to his or her internal moral compass. Most fraudsters are first-time criminals and do
not see themselves as criminals, but rather a victim of circumstance. Rationalisations are often
based on external factors, such as a need to take care of a family, or a dishonest employer which
is seen to minimise or mitigate the harm done by the crime.
The key to dealing with fraud is to focus on prevention. It is cheaper and more effective to
prevent fraud from happening than it is to try to detect the crime. By the time the fraud is
discovered, the money is gone and chances are slim to none that it will be recovered.
Additionally, it is costly and time consuming to investigate a fraud.
Perhaps the most important lesson of the fraud triangle is that all three factors must normally be
present for fraud to occur. If any one of the three elements is missing, fraud may not occur.
The key to dealing with fraud is to focus on the prevention of opportunity. It is much less
expensive and more effective to prevent fraud from happening than it is to try to detect the crime.
Solution
The Fraud triangle is a framework designed to explain the reasoning behind a worker’s decision
to commit workplace fraud. The three stages, categorised by the effect on the individual, can be
summarised as pressure, opportunity and rationalisation. Broken down, they are:
Step 1 – the pressure on the individual – is the motivation behind the crime and can be either
personal financial pressure, such as debt problems, or workplace debt problems, such as a
shortfall in revenue. The pressure is seen by the indiv.
SumNumbers.java import java.util.Scanner;public class SumNumbe.pdfankkitextailes
SumNumbers.java
import java.util.Scanner;
public class SumNumbers {
/**
* @param args
*/
public static void main(String[] args) {
// TODO Auto-generated method stub
Scanner scan = new Scanner(System.in);
int sum = 0;
while(true){
System.out.println(\"Enter integer:\");
int n = scan.nextInt();
if(n == -1){
break;
}
sum = sum + n;
}
System.out.println(\"The sum is \"+sum);
}
}
Output:
Enter integer:
1
Enter integer:
2
Enter integer:
3
Enter integer:
4
Enter integer:
5
Enter integer:
6
Enter integer:
7
Enter integer:
8
Enter integer:
9
Enter integer:
-1
The sum is 45
Solution
SumNumbers.java
import java.util.Scanner;
public class SumNumbers {
/**
* @param args
*/
public static void main(String[] args) {
// TODO Auto-generated method stub
Scanner scan = new Scanner(System.in);
int sum = 0;
while(true){
System.out.println(\"Enter integer:\");
int n = scan.nextInt();
if(n == -1){
break;
}
sum = sum + n;
}
System.out.println(\"The sum is \"+sum);
}
}
Output:
Enter integer:
1
Enter integer:
2
Enter integer:
3
Enter integer:
4
Enter integer:
5
Enter integer:
6
Enter integer:
7
Enter integer:
8
Enter integer:
9
Enter integer:
-1
The sum is 45.
The absorptivity, The transmissivity and reflectivity are given by.pdfankkitextailes
The absorptivity, The transmissivity and reflectivity are given by:
If the amounts of radiation energy absorbed, reflected, and transmitted when radiation strikes a
surface are measured in percentage of the total energy in the incident electromagnetic waves.
The total energy would be divided into three groups, they are called absorptivity (), reflectivity ()
and transmissivity (t).
+ + t = 1 (1)
A body is considered transparent if it can transmit some of the radiation waves falling on its
surface. If electromagnetic waves are not transmitted through the substance it is therefore called
opaque. When radiation waves hit the surface of an opaque body, some of the waves are
reflected back while the other waves are absorbed by a thin layer of the material close to the
surface. For engineering purposes all materials are thick enough that they can be considered
opaque reducing equation 1 to:
+ = 1 (2)
Reflectivity deviates from the other properties in that it is bidirectional in nature. In other words,
this property depends on the direction of the incident of radiation as well as the direction of the
reflection. Therefore, the reflected rays of a radiation spectrum incident on a real surface in a
specified direction forms an irregular shape that is not easily predictable. In practice, surfaces are
assumed to reflect in a perfectly specular or diffuse manner. In a specular reflection, the angles
of reflection and incidence are equal. In diffuse reflection, radiation is reflected equally in all
directions. Reflection from smooth and polished surfaces can be assumed to be specular
reflection, whereas reflection from rough surfaces approximates diffuse reflection.
Considering this given object as an opaque substance, The value of transmissivity is zero
So, the Absorptivity + Reflectivity = 1---(3)
Assuming 100% emmitance of the absorbed body
We get the value of Absorptivity = value of Emmisivity = 0.7
So, from equation (3)
Reflectivity = 1 - Absorptivity
Reflectivity = 1 - 0.7 = 0.3
Heat Rate Reflected per unit area is given by:
Gref = G * Reflectivity = 1000 *0.3 = 300 W/m2
So, The Rate Reflected per unit area is Gref 300 W/m2
Solution
The absorptivity, The transmissivity and reflectivity are given by:
If the amounts of radiation energy absorbed, reflected, and transmitted when radiation strikes a
surface are measured in percentage of the total energy in the incident electromagnetic waves.
The total energy would be divided into three groups, they are called absorptivity (), reflectivity ()
and transmissivity (t).
+ + t = 1 (1)
A body is considered transparent if it can transmit some of the radiation waves falling on its
surface. If electromagnetic waves are not transmitted through the substance it is therefore called
opaque. When radiation waves hit the surface of an opaque body, some of the waves are
reflected back while the other waves are absorbed by a thin layer of the material close to the
surface. For engineering purposes all materials are thick .
Curly brackets mean exactly the same as ordinary parentheses in thi.pdfankkitextailes
Curly brackets mean exactly the same as ordinary parentheses in this context (in a few contexts
(, [ and { can all be defined to take a special meaning, but ordinarily they are all different ways
of typesetting).
Cauchy\'s inequality is of the form
Solution
Curly brackets mean exactly the same as ordinary parentheses in this context (in a few contexts
(, [ and { can all be defined to take a special meaning, but ordinarily they are all different ways
of typesetting).
Cauchy\'s inequality is of the form.
Solution (A)Nowadays Sugar is not listed directly by name suga.pdfankkitextailes
Solution
:
(A)Nowadays Sugar is not listed directly by name \"sugar\" on an ingredients list.It is listed by
name like dextrose,high-fructose corn syrup and carob syrup on an ingredient list.These are
called added sugar.Uptake of excess sugar is the main cause of many sugar related diseases like
diabetes.So,manufacturer hide the amount of total sugar added in ingredient by not mentioning it
directly and make it unrecognizable to the public..
RNA sequencing also known as next generation genome sequencing and t.pdfankkitextailes
RNA sequencing also known as next generation genome sequencing and this method of RNA
sequencing using DNAases are useful to detect single nucleotide polymorphism & post-
transcriptional single nucleotide variants. Therefore, this type of sequencing is useful to annotate
forensic genomics. Identifying fusion genes using RNA sequencing has meticulous importance
to study their relationship with cancer genome (through Sanger sequencing). Specific gene
expression studies (mRNA sequence genome) studies used to identify the gene responsible for
the coding of the ion- channel protein expression.
For example: Poliomyelities is the resultant abnormality due to this enterovirus. The RNA
sequencing of the meat product containing virus is additional studies might confirm (or refute)
the genomics of poliovirus -hypothesis that the meat was the source of the poliomyelitis
outbreaks.
Solution
RNA sequencing also known as next generation genome sequencing and this method of RNA
sequencing using DNAases are useful to detect single nucleotide polymorphism & post-
transcriptional single nucleotide variants. Therefore, this type of sequencing is useful to annotate
forensic genomics. Identifying fusion genes using RNA sequencing has meticulous importance
to study their relationship with cancer genome (through Sanger sequencing). Specific gene
expression studies (mRNA sequence genome) studies used to identify the gene responsible for
the coding of the ion- channel protein expression.
For example: Poliomyelities is the resultant abnormality due to this enterovirus. The RNA
sequencing of the meat product containing virus is additional studies might confirm (or refute)
the genomics of poliovirus -hypothesis that the meat was the source of the poliomyelitis
outbreaks..
option b ,here return type is int and the Logical operator OR us.pdfankkitextailes
option \"b\" ,here return type is int and the Logical operator OR used are appropriate but not in
other cases.
Solution
option \"b\" ,here return type is int and the Logical operator OR used are appropriate but not in
other cases..
RbF because lattice energy is inversly proportio.pdfankkitextailes
RbF because lattice energy is inversly proportional to the radii of the ions present..
Solution
RbF because lattice energy is inversly proportional to the radii of the ions present...
Pete Best (born 24 November 1941) is a British mu.pdfankkitextailes
Pete Best (born 24 November 1941) is a British musician, principally known as the
original drummer in the Beatles. He was born in the city of Madras, then part of British India.
After Best\'s mother, Mona Best (1924–1988), moved to Liverpool in 1945, she opened The
Casbah Coffee Club in the cellar of the Bests\' large house in Liverpool. It became very popular
with British youths, having a membership of over 1,000. The Beatles (at the time known as the
Quarrymen) played some of their first concerts at the club. Best played there with the Beatles as
well as his first band, the Black Jacks. The Beatles invited Best to join on 12 August 1960, on
the eve of the group\'s first Hamburg season of club dates. He was eventually replaced by Ringo
Starr on 16 August 1962, when the group\'s manager, Brian Epstein, dismissed Best under the
direction of John Lennon, Paul McCartney, and George Harrison, following their first recording
session at Abbey Road Studios. After working in a number of commercially unsuccessful groups
Best gave up the music industry to work as a civil servant for twenty years, before starting the
Pete Best Band. He has been married for over 45 years to Kathy Best; they have two daughters
and four grandchildren.
Solution
Pete Best (born 24 November 1941) is a British musician, principally known as the
original drummer in the Beatles. He was born in the city of Madras, then part of British India.
After Best\'s mother, Mona Best (1924–1988), moved to Liverpool in 1945, she opened The
Casbah Coffee Club in the cellar of the Bests\' large house in Liverpool. It became very popular
with British youths, having a membership of over 1,000. The Beatles (at the time known as the
Quarrymen) played some of their first concerts at the club. Best played there with the Beatles as
well as his first band, the Black Jacks. The Beatles invited Best to join on 12 August 1960, on
the eve of the group\'s first Hamburg season of club dates. He was eventually replaced by Ringo
Starr on 16 August 1962, when the group\'s manager, Brian Epstein, dismissed Best under the
direction of John Lennon, Paul McCartney, and George Harrison, following their first recording
session at Abbey Road Studios. After working in a number of commercially unsuccessful groups
Best gave up the music industry to work as a civil servant for twenty years, before starting the
Pete Best Band. He has been married for over 45 years to Kathy Best; they have two daughters
and four grandchildren..
NaOH is a strong electrolyte i.e. it is highly so.pdfankkitextailes
NaOH is a strong electrolyte i.e. it is highly soluble in water to give Na+ and OH-
ions. Now in presence of common ions decreases the solubility of sparingly soluble compounds
in water. So Hf(OH)4 will be least soluble in NaOH solution as its solubility is further reduced
and already it is least soluble in water.
Solution
NaOH is a strong electrolyte i.e. it is highly soluble in water to give Na+ and OH-
ions. Now in presence of common ions decreases the solubility of sparingly soluble compounds
in water. So Hf(OH)4 will be least soluble in NaOH solution as its solubility is further reduced
and already it is least soluble in water..
M2i Webinar - « Participation Financière Obligatoire » et CPF : une opportuni...M2i Formation
Suite à l'entrée en vigueur de la « Participation Financière Obligatoire » le 2 mai dernier, les règles du jeu ont changé !
Pour les entreprises, cette révolution du dispositif est l'occasion de revoir sa stratégie de formation pour co-construire avec ses salariés un plan de formation alliant performance de l'organisation et engagement des équipes.
Au cours de ce webinar de 20 minutes, co-animé avec la Caisse des Dépôts et Consignations, découvrez tous les détails actualisés sur les dotations et les exonérations, les meilleures pratiques, et comment maximiser les avantages pour les entreprises et leurs salariés.
Au programme :
- Principe et détails de la « Participation Financière Obligatoire » entrée en vigueur
- La dotation : une opportunité à saisir pour co-construire sa stratégie de formation
- Mise en pratique : comment doter ?
- Quelles incidences pour les titulaires ?
Webinar exclusif animé à distance en coanimation avec la CDC
Conseils pour Les Jeunes | Conseils de La Vie| Conseil de La JeunesseOscar Smith
Besoin des conseils pour les Jeunes ? Le document suivant est plein des conseils de la Vie ! C’est vraiment un document conseil de la jeunesse que tout jeune devrait consulter.
Voir version video:
➡https://youtu.be/7ED4uTW0x1I
Sur la chaine:👇
👉https://youtube.com/@kbgestiondeprojets
Aimeriez-vous donc…
-réussir quand on est jeune ?
-avoir de meilleurs conseils pour réussir jeune ?
- qu’on vous offre des conseils de la vie ?
Ce document est une ressource qui met en évidence deux obstacles qui empêchent les jeunes de mener une vie épanouie : l'inaction et le pessimisme.
1) Découvrez comment l'inaction, c'est-à-dire le fait de ne pas agir ou d'agir alors qu'on le devrait ou qu'on est censé le faire, est un obstacle à une vie épanouie ;
> Comment l'inaction affecte-t-elle l'avenir du jeune ? Que devraient plutôt faire les jeunes pour se racheter et récupérer ce qui leur appartient ? A découvrir dans le document ;
2) Le pessimisme, c'est douter de tout ! Les jeunes doutent que la génération plus âgée ne soit jamais orientée vers la bonne volonté. Les jeunes se sentent toujours mal à l'aise face à la ruse et la volonté politique de la génération plus âgée ! Cet état de doute extrême empêche les jeunes de découvrir les opportunités offertes par les politiques et les dispositifs en faveur de la jeunesse. Voulez-vous en savoir plus sur ces opportunités que la plupart des jeunes ne découvrent pas à cause de leur pessimisme ? Consultez cette ressource gratuite et profitez-en !
En rapport avec les " conseils pour les jeunes, " cette ressource peut aussi aider les internautes cherchant :
➡les conseils pratiques pour les jeunes
➡conseils pour réussir
➡jeune investisseur conseil
➡comment investir son argent quand on est jeune
➡conseils d'écriture jeunes auteurs
➡conseils pour les jeunes auteurs
➡comment aller vers les jeunes
➡conseil des jeunes citoyens
➡les conseils municipaux des jeunes
➡conseils municipaux des jeunes
➡conseil des jeunes en mairie
➡qui sont les jeunes
➡projet pour les jeunes
➡conseil des jeunes paris
➡infos pour les jeunes
➡conseils pour les jeunes
➡Quels sont les bienfaits de la jeunesse ?
➡Quels sont les 3 qualités de la jeunesse ?
➡Comment gérer les problèmes des adolescents ?
➡les conseils de jeunes
➡guide de conseils de jeunes
Newsletter SPW Agriculture en province du Luxembourg du 03-06-24BenotGeorges3
Les informations et évènements agricoles en province du Luxembourg et en Wallonie susceptibles de vous intéresser et diffusés par le SPW Agriculture, Direction de la Recherche et du Développement, Service extérieur de Libramont.
https://agriculture.wallonie.be/home/recherche-developpement/acteurs-du-developpement-et-de-la-vulgarisation/les-services-exterieurs-de-la-direction-de-la-recherche-et-du-developpement/newsletters-des-services-exterieurs-de-la-vulgarisation/newsletters-du-se-de-libramont.html
Bonne lecture et bienvenue aux activités proposées.
#Agriculture #Wallonie #Newsletter #Recherche #Développement #Vulgarisation #Evènement #Information #Formation #Innovation #Législation #PAC #SPW #ServicepublicdeWallonie