Ma formation en électromécanique, et le stage que j’ai effectué m’ont permis de développer plusieurs aptitudes et compétences nécessaires à la pratique du métier d’un électromécanicien. Ainsi, le travail en équipe, l’organisation, le dynamisme, l’esprit d’initiative ou bien encore l’aspect relationnel de la profession sont autant de compétences que j’ai pu perfectionner.
Ma formation en électromécanique, et le stage que j’ai effectué m’ont permis de développer plusieurs aptitudes et compétences nécessaires à la pratique du métier d’un électromécanicien. Ainsi, le travail en équipe, l’organisation, le dynamisme, l’esprit d’initiative ou bien encore l’aspect relationnel de la profession sont autant de compétences que j’ai pu perfectionner.
Mohammed Shakeel Ahmed is an ELV/Low current systems engineer from Hyderabad, India seeking new opportunities. He has over 4 years of experience in designing, installing, testing and commissioning various ELV systems including fire alarms, CCTV, access control and building automation. He is proficient in system design, project management, and technical training. He holds a B.Tech in Electronics and Communication Engineering and has undergone additional training programs in fire safety, security and electrical systems.
Jerry Nurminen is a Finnish engineer seeking new opportunities. He holds a Bachelor's Degree in Engineering with an emphasis on automation technology from Tampere University of Applied Sciences. He has over 10 years of experience in fields like electrical work, construction, security, and automation system installations and sales. His skills include Microsoft Office, Windows, CAD, programming, and automation software. He is fluent in Finnish and English.
Sommaire
01-Installation électrique
02-Appareillage électrique
03-Dimensionnement dune installation
04-Sélectivité et coordination dune installation
05-Protection des personnes
06-Commande des machines
Recently, a new phenomenon has appeared during the search for the causes of network failures. It has been noted data communication issues are becoming more frequent in situations where conventional network analysers do not reveal any weak points.
It was the investigation of shield currents on industrial data communication lines that prompted the usual diagnostic approach to take a completely new turn. It soon became clear that the bus itself was in perfect condition, but was being affected by external influences that are generally referred to as “EMC interference“. Further extensive measurements, both in the bonding system and in the shielding connections of bus lines, revealed an association between high leakage currents (mostly of higher frequency) and bus failures.
This presentation will explain the theory behind the measurements, the tools used to perform them and will provide limits against which all industrial networks should be checked against.
Hamdan Hamoud Al khalaf is an experienced rig electrician seeking work. He has over 15 years of experience working on rigs in Europe, the Middle East, and Africa. His experience includes working with top drive systems, SCR power systems, generators, motors, and other electrical equipment. He is proficient in English, German, and Arabic and has extensive safety and technical training.
Mohamed Fahim is an experienced Project Engineer and Quality Control Officer with over 5 years of experience working in the UAE. He has extensive experience managing projects such as the Dubai Metro and various commercial buildings. Mohamed has expertise in Building Management Systems, fire alarms, CCTV, and metering systems. He is proficient in AutoCAD, MS Office, and networking skills. Mohamed holds a BE in Electronics and Communication Engineering from Anna University in India and a Post Graduate Diploma in Engineering from the University of Western Australia. He is looking to further his career in a progressive company.
Mohammed Shakeel Ahmed is an ELV/Low current systems engineer from Hyderabad, India seeking new opportunities. He has over 4 years of experience in designing, installing, testing and commissioning various ELV systems including fire alarms, CCTV, access control and building automation. He is proficient in system design, project management, and technical training. He holds a B.Tech in Electronics and Communication Engineering and has undergone additional training programs in fire safety, security and electrical systems.
Jerry Nurminen is a Finnish engineer seeking new opportunities. He holds a Bachelor's Degree in Engineering with an emphasis on automation technology from Tampere University of Applied Sciences. He has over 10 years of experience in fields like electrical work, construction, security, and automation system installations and sales. His skills include Microsoft Office, Windows, CAD, programming, and automation software. He is fluent in Finnish and English.
Sommaire
01-Installation électrique
02-Appareillage électrique
03-Dimensionnement dune installation
04-Sélectivité et coordination dune installation
05-Protection des personnes
06-Commande des machines
Recently, a new phenomenon has appeared during the search for the causes of network failures. It has been noted data communication issues are becoming more frequent in situations where conventional network analysers do not reveal any weak points.
It was the investigation of shield currents on industrial data communication lines that prompted the usual diagnostic approach to take a completely new turn. It soon became clear that the bus itself was in perfect condition, but was being affected by external influences that are generally referred to as “EMC interference“. Further extensive measurements, both in the bonding system and in the shielding connections of bus lines, revealed an association between high leakage currents (mostly of higher frequency) and bus failures.
This presentation will explain the theory behind the measurements, the tools used to perform them and will provide limits against which all industrial networks should be checked against.
Hamdan Hamoud Al khalaf is an experienced rig electrician seeking work. He has over 15 years of experience working on rigs in Europe, the Middle East, and Africa. His experience includes working with top drive systems, SCR power systems, generators, motors, and other electrical equipment. He is proficient in English, German, and Arabic and has extensive safety and technical training.
Mohamed Fahim is an experienced Project Engineer and Quality Control Officer with over 5 years of experience working in the UAE. He has extensive experience managing projects such as the Dubai Metro and various commercial buildings. Mohamed has expertise in Building Management Systems, fire alarms, CCTV, and metering systems. He is proficient in AutoCAD, MS Office, and networking skills. Mohamed holds a BE in Electronics and Communication Engineering from Anna University in India and a Post Graduate Diploma in Engineering from the University of Western Australia. He is looking to further his career in a progressive company.
1. Fabrizio IETRO TECHNICIEN EN ELECTRICITE ET
8 rue Aubert frères EN AUTOMATISME DES BATIMENTS
54150 BRIEY
Tél : 03.82.20.59.94
GSM : 00352.621.889.506
Permis B + véhicule
Compétences
Gestion du personnel et des pointages sur chantiers
Planification des travaux pour le personnel sur les chantiers
Mise en œuvre de la sécurité sur les chantiers
Mise en œuvre, maintenance et dépannage des systèmes en courant fort et faible
Programmations des systèmes E.I.B KNX via le logiciel ETS
Programmations et mise en service et dépannage des systèmes incendie ESSER
Raccordement d’armoires électriques industriel, tertiaire et bâtiment
Réalisation de tout type de cheminement métallique et plastique
Expérience Professionnelle
2011-2015 : Technicien de maintenance courant faible- DALKIA
2009-2010 : Technicien de maintenance courant faible-SOCOM
2006-2009 : Chef de chantier en industrie et tertiaire. Electricité Wagener et fils
2004-2006 : Electromécanicien - Husky
2002-2004 : Câbleur en atelier - Energolux
2001-2002 : Electricien industriel - SOCOM
2000-2001 : Chef d’équipe - Siemens Industrie service
1999-2000 : Electricien industriel - Conceptélec
1998-1999 : Electricien industriel - Spie Trindel
1997-1998 : Electricien bâtiment- Paul Wagener et fils
1996-1997 : Electricien industriel - Spie Trindel
Formation
2010-2011 : Technicien en électricité et en automatisme des bâtiments - AFPA a Metz
1994-1996 : Baccalauréat Professionnel EIE
1992-1994 : BEP-CAP électrotechnique
Habilitation électrique C18510 B2 –BR H2–HC
Informations complémentaires
Connaissance des logiciels, Offices,ETS,Tools,Winmag