2. 1.1
Work Programme (WP) NMP
document de base des futurs appels
Programme de travail : sur 2 ans (négociation)
- forte évolution par rapport à FP7: accent sur la
recherche appliquée, plus proche du marché (TRL 4+)
- des appels annuels
Thèmes proposés : moins prescriptifs, un fort accent
est mis sur l’impact
Une présentation des thèmes harmonisée:
- défi spécifique à relever, justification
- périmètre de l’activité à adresser
- impact attendu, en lien avec le défi
- niveau TRL attendu,
- projet de Recherche (100%) ou d’Innovation (70%)
3. Propositions attendues
1.2
1
Défis sociétaux
FET Pro-Active
EIT/KIC
KET nanotech/matériau
Raw Materials
Adv. Manufacturing
Fonds
Structurels
KET système de production
TRL 1
Principes de base
observés
TRL 2
Concepts de la
technologie
formulés
TRL 3
Preuve
expérimentale du
concept
TRL 4
TRL 5
Validation en
laboratoire de la
technologie
Validation en
environnement
significatif de la
technologie
TRL 6
TRL 7
TRL 8
TRL 9
Démonstration en
Qualification du
Système réel
Démonstration en
prouvé via missions
environnement
système réel
environnement réel
significatif
complet
réussies
4. 1.3
1
Propositions attendues
‘Eco-design: the systematic integration of
environmental considerations into product and
process design’
(NRC Canada, 2003)
Eco-design
Traditional design
Raw materials
extraction and
processing
Production
Use
End of Life
5. 1.4
1
Impact attendu
Quelques mots clés
- Croissance économique, compétitivité
- Emploi, création de start-up
- Bénéfice pour l’environnement, réduction de
l’utilisation des ressources
- Renforcement des coopérations:
au sein de la chaine de la valeur,
entre les Etats membres, les Régions
- Contribution aux défis sociétaux
Mais aussi
- Exploitation, utilisation des résultats: capacités, objectifs,
stratégie, optimisation d’équipements existants…
6. 2
1
Propositions et Evaluations
Publication appel prévue le 11/12/2013
sous réserve des vote du PE et du CE, attendus début novembre
Evaluations:
2 étapes pour NM hors lignes pilotes
1 étape pour les PPP et CSA et lignes pilotes
-
Propositions attendues:
PPP, CSA: 04/2014
NM: 04/2014 (étape 1) -> 06/2014 (étape 2)
-
Des critères uniformes (excellence; impact; mise en œuvre)
-
« Time to Grant » : réduit à max 8 mois (5 m. évaluation + 3 m. négociation)
Contrepartie: tout projet identifié comme pouvant nécessiter + de 3 mois de négo sera rétrogradé
7. 2.1
1
Préparer une proposition
1. Obtenir (et lire en détails) le programme de travail de l’AP
http://ec.europa.eu/xxxx
Identifier le (ou les) topic qui vous intéresse
Evaluer l’opportunité d’une proposition: intérêt pour l’organisme, bénéfice
attendu, objectif scientifique et technique, moyens à mobiliser
Contacter si besoin le « project officer » en charge du sujet, pour s’assurer que
votre projet est bien dans le « scope ». Le PCN peut également vous aider.
2. Identifier et rechercher les partenaires potentiels (ci-après)
Il faut tout d’abord vous positionner comme:
coordinateur (expérience requise) et rechercher des partenaires
partenaire et chercher à intégrer un consortium
3. Commencer à préparer la proposition et définir le budget
rigueur: what, why, when, who, how, vérifier la pertinence
clarté: des objectifs, moyens, résultats attendus
factuel: infos vérifiables, mesurables, éviter le déclaratif
pertinence: entre objectifs / partenariat / moyens demandés
8. 2.2
1
Rechercher des partenaires
Utilisez avant tout VOTRE réseau
• Utilisez les réseaux de spécialistes des projets européens
Le réseau des PCN NMP européens http://www.nmpteam.com
Les réseaux régionaux : EEN, CCI, Régions et via le PCN PME
http://een.ec.europa.eu/index_fr.htm
Le service Cordis: http://cordis.europa.eu/partners-service/home_fr.html
• Participez aux évènements de recherche de partenaires
Organisés par les PCN (brokerage à Strasbourg le 29/11+ en Régions)
Inscription: http://www.b2match.eu/kets2014/
Dans le cadre des conférences spécialisées (Manufuture, 7-8/10)
De la Commission (infoday PPP 17/12 à Bruxelles)
9. 3
1
WP NMP 2014-2015
1. Overcome the death valley
→ Bridging the gap between nanotechnology research and markets
→ Exploi%ng the cross-sector poten%al of Nanotechnologies and Advanced materials to
drive competitiveness and sustainability
2. NM addressing societal challenges
→ Nanotechnology and Advanced Materials for more effec%ve Healthcare
→ Nanotechnology and Advanced Materials for low carbon energy technologies and Energy
Efficiency
3. Overraching aspects of NMP
→ Safety of nanotechnology-based applica%ons and support for the development of
→ Addressing generic needs in support of governance, standards, models and structuring in
nanotechnology, advanced materials and production
4. Advanced manufacturing and processing: 3 PPP
→ FoF - Factories of the Future
→ EeB – Energy-efficient Buildings
→ SPIRE – Sustainable Process Industries
5. Biotechnologies et divers
10. 3.1
1
Call for Nanotechnologies, Advanced
Materials and Production
Bridging the gap between nanotechnology
research and markets
This challenge addresses three of the key European
nano-enabled industrial value chains:
•lightweight multifunctional materials and sustainable
composites;
•structured surfaces;
• functional fluids.
11. 1
Appel 2014: Overcome the death valley
Bridging the gap between nanotechnology research and markets
1
4
5
Open a cces s pi l ot l ines for cos t effecti ve
4-5 to 6
na nocompos i tes
High defi ni ti on pri nti ng of
4-5 to 6
mul ti functi ona l ma teri a ls
Indus tri a l -s ca l e production of
4-5 to 6
na nomateri a ls for pri nti ng a ppl i ca ti ons
R&I
I
I
Li gne pi lote de production de na nocompos i tes ba s coût,
a utoma ti s a ti on, métrol ogi e, s ta nda rdi s a ti on
Procédé d’i mpres s i on de fort volume, à ha ute défi niti on,
producti vi té, ga i n res s ources
Synthès e, foncti onna l i s a tion de na noma téri a ux pour i mpres s i on
pa r procédé « l i qui de ». Nouvea ux ma rchés , norma li s a ti on
Exploiting the cross-sector potential of Nanotechnologies and Advanced materials to drive competitiveness and
sustainability
18
Ma teri a l s s ol utions for us e i n the
crea ti ve i ndus try s ector
20
Wideni ng ma teri a l s model s
21
26
Ma teri a l s -ba s ed s ol uti ons for the
protection or pres erva tion of Europea n
cul tura l heri tage
Accel era ti ng the indus tri a l upta ke of
na notechnol ogi es , a dva nced ma teri a l s
or a dva nced ma nufa cturing and
proces s i ng technol ogi es by SME
5-7
I
5
R&I
5-7
I
SME
i ns trument
Sol uti ons ma téria ux à pa rti r de déchets ou s ous -produi ts ou pa r
bi omi méti s me (fa i ble i mpa ct envi ronnementa l ). Toute l a cha i ne
de l a va l eur
Extens i on de modèl es « mes os ca l e » pour l a concepti on de
nouvea ux ma téri a ux, va l ida ti on expérimenta l e.
1 ou pl us i eurs ma téri aux foncti onnal i s és
res ta urati on et la cons erva ti on d’œuvres d’a rt.
a ppl iqués
à
la
Accél érer l e tra ns fert de technol ogi e des NM, en 3 pha s es :
fa i s a bi li té (50k€), a cti vi tés d’i nnova tion, pla n de dével oppement
et de commercia l i s a tion
12. 1
Call for Nanotechnologies, Advanced
Materials and Production
Bridging the gap between nanotechnology
research and markets
NMP 4 - 2014: High definition printing of multifunctional materials
* developing and demonstrating in relevant industrial environments
high throughput printing technologies (possibly in combination with
other deposition technologies) with higher definitions (down to
nanoscale) utilising a wider spectrum of multifunctional materials.
Pilot line setting should be used to verify production speed and
reliability, as well as sufficient yield, quality and functionality of the
intended application.
* start at TRL 4-5, target TRL 6.
* Innovation Actions (70% funding)
13. 1
Call for Nanotechnologies, Advanced
Materials and Production
Bridging the gap between nanotechnology
research and markets
NMP 5 - 2014: Industrial-scale production of nanomaterials for
printing applications
* developing and demonstrating in relevant industrial environments
the synthesis and functionalisation of nano-materials for printing
applications with high process throughput. The developed
nanomaterials (inks) formulations should demonstrate functionality,
process compatibility, non-toxicity, environmental friendliness (e.g.
aqueous media) and low-cost.
• start at TRL 4-5, target TRL 6.
• Innovation Actions (70% funding)
14. 3.2
1
Call for Nanotechnologies, Advanced
Materials and Production
Nanotechnology and Advanced Materials
for more effective Healthcare
This challenge taps into the potential of nanotechnologies and
advanced materials to enable more effective therapies and
diagnostics for important diseases.
production technologies of the nanomedicines and
nanomaterials have to be scaled-up to the pilot-scale, to
provide production quantities that are sufficient for clinical
testing.
develop the technologies and therapies to the point where
they can be considered fit for purpose to start clinical trials
15. 1
Appel 2014: Addressing societal challenges
Nanotechnology and Advanced Materials for more effective healthcare
4-5 to 67
8
Scale-up of nanomedicine production
9
Networking of SMEs in the nano-biomedical
sector
CSA
10
Biomaterials for the treatment of Diabetes
Mellitus
5
Lignes pilotes et procédés intensifiés de production de nanoparticules pour
la médecine, permettant la réalisation d’essais cliniques
1
Support et mise en réseau de PME pour leur permettre d’accéder aux
project innovations en nano biomédical.
Développement de biomatériaux fonctionnalisés appliqués au traitement
R&I de patients diabétiques, leur permettant une amélioration de conditions de
vie. Réduction coût traitement.
R&I
Nanotechnology and Advanced Materials for low carbon energy technologies and Energy Efficiency
13
17
Storage of energy produced by decentralised
sources
Post-lithium ion batteries for electric
automotive applications
5
R&I
4
R&I
Solutions matériaux pour le stockage de l’énergie électrique renouvelable
(hors H2)
Nouvelles chimies, nouveaux matériaux au-delà du Li-ion, pour accroitre les
performances, durabilité…des batteries.
16. 3.3
1
Call for Nanotechnologies, Advanced
Materials and Production
Nanotechnology and Advanced Materials
for more effective Healthcare
NMP 8 - 2014: Scale-up of nanopharmaceuticals production
* develop one or more pilot lines and processes for the scaling-up of
the production of innovative nanopharmaceuticals to the quantities
needed for clinical testing, taking into account the medical regulatory
requirements. The nanopharmaceuticals (exclusing therapy of
cancer) selected for scaling-up shall be translatable and in an
advanced stage of pre-clinical development, with positives
perspectives to proceed to clinical testing. Clinical testing itself is not
part of the project.
* start at TRL 4-5 and target TRL 6-7.
* Type of action: Research & Innovation Actions (100%)
17. 1
Call for Nanotechnologies, Advanced
Materials and Production
Nanotechnology and Advanced Materials
for more effective Healthcare
NMP 9 - 2014: Networking of SMEs in the nano-biomedical
sector
* provide advice and follow-up at all stages of the research and
development and provide examples of best practice to European
R&D teams in nano-bio-medicine. It shall provide SMEs and other
organisations with a technological and business oriented assessment
of their technologies and provide business advice before engaging
further resources and efforts for preclinical and clinical tests.
Type of action: Coordination and Support Action (CSA)
no more than one action will be funded
18. 1
Call for Nanotechnologies, Advanced
Materials and Production
Nanotechnology and Advanced Materials
for more effective Healthcare
NMP 10 - 2014: Biomaterials for the treatment of diabetes
mellitus
* develop one or more functional biomaterials for the long-term
clinical efficacy of transplanted pancreatic islets, and the safe and
reliable harvesting of cells from identified source(s);
generate comprehensive pre-clinical data and after completion of
the project, the material should be in an optimal position for entering
clinical trials or, in case of innovative diagnostic tools, for the
validation stage.
* Start TRL 5.
* Type of action: Research & Innovation Actions
19. 3.4
1
Nanotechnology and Advanced Materials for
low-carbon energy technologies and Energy
Efficiency
This challenge taps into nanotechnologies and advanced
materials as foundations of low-carbon energy technologies
which in turn support the EU objectives to increase the use of
renewable energy sources and to significantly improve energy
efficiency.
develop to a technology readiness demonstrating their
potential for take-up in practical applications, which would be
further pursued in technology or product development under the
relevant societal challenge.
20. 3.4
1
Appel 2014: Addressing societal challenges
Nanotechnology and Advanced Materials for more effective healthcare
4-5 to 67
8
Scale-up of nanomedicine production
9
Networking of SMEs in the nano-biomedical
sector
CSA
10
Biomaterials for the treatment of Diabetes
Mellitus
5
Lignes pilotes et procédés intensifiés de production de nanoparticules pour
la médecine, permettant la réalisation d’essais cliniques
1
Support et mise en réseau de PME pour leur permettre d’accéder aux
project innovations en nano biomédical.
Développement de biomatériaux fonctionnalisés appliqués au traitement
R&I de patients diabétiques, leur permettant une amélioration de conditions de
vie. Réduction coût traitement.
R&I
Nanotechnology and Advanced Materials for low carbon energy technologies and Energy Efficiency
13
17
Storage of energy produced by decentralised
sources
Post-lithium ion batteries for electric
automotive applications
5
R&I
4
R&I
Solutions matériaux pour le stockage de l’énergie électrique renouvelable
(hors H2)
Nouvelles chimies, nouveaux matériaux au-delà du Li-ion, pour accroitre les
performances, durabilité…des batteries.
21. 3.4
1
Nanotechnology and Advanced Materials for
low-carbon energy technologies and Energy
Efficiency
NMP 13 - 2014: Storage of energy produced by
decentralised sources
* develop innovative materials solutions that will make storage
technologies (excluding Fuel Cell and Hydrogen Joint
Undertaking) more available, better performing and more cost
effective. The solutions should exploit synergies between
technologies as much as possible, contributing to the
development of hybrid systems.
* TRL 5.
* Type of action: Research & Innovation Actions
22. 3.4
1
Nanotechnology and Advanced Materials for
low-carbon energy technologies and Energy
Efficiency
NMP 17 - 2014: Post-lithium ion batteries for electric automotive
applications:
a contribution to the Green Vehicles initiative
* addressing new chemistries that allow high-energy densities, and by
developing related specific new materials e.g. for cathodes and
electrolytes
* development of prototypes to show clear progress beyond existing
post lithium-ion technology in terms of durability, cyclability and
energy density, with consideration of scalability up to full scale for
automotive applications.
• TRL 5.
* Type of action: Research and Innovation Actions
23. 3.5
4.1
Appel 2014: Overarching aspects
1
Safety of nanotechnology-based applications and support for the development of regulation
28
29
30
Joint EU & MS activity on the next phase of
research in support of regulation “NANOREG
II"
Coordination of EU and international efforts in
safety of nanotechnology
Assessment of environmental impact of
nanomaterials
5
CSA
4
R&I, 1 Développer des approches réglementaires pour la production de
project nanomatériaux de façon sûre. Valider outils et méthodologie.
1
Coordonner les efforts de recherche visant à la gestion des risques liés aux
project nanotechnologies, rationaliser et mettre en commun les données.
Développement d’un cadre de modélisation et des tests, sur le cycle de vie
R&I
du produit pour évaluer l’impact environnemental de nanomatériaux.
Addressing generic needs in support of governance, standards, models and structuring in nanotechnology, advanced
materials and production
33
Novel visualization tools for enhanced
nanotechnology awareness
CSA
35
The Materials "Common House"
CSA
36
Networking and sharing of best practises in
management of new advanced materials
through the eco-design products, ecoinnovation and product life-cycle management
37
Business models with new supply chains for
sustainable customer-driven small series
production
6-7
38
Facilitating knowledge management,
networking and coordination in NMP
CSA
39
Practical experience and facilitating combined
funding for large-scale RDI initiatives
CSA
CSA
Outil visuel de communication vers le grand public, sur les
1
nanotechnologies, pour faciliter l’acceptation et prendre la mesure des
project
risques.
1
Suivi des innovations en science et ingénierie des matériaux au travers de
project l’EU pour une action ultérieure plus efficace.
Mise en réseau d’acteurs partageant des connaissances et des bonnes
pratiques en eco-design, éco-innovation et ACV de produits utilisant des
matériaux avancés
Modèle de chaine d’approvisionnement pour la production de petite série,
I
plus flexible, plus rapide, axé sur la demande, localisé pour réduire l’impact
environnemental.
AC pour mise en commun d’un système de gestion des connaissances issus
de NMP, reposant sur des indicateurs, et de proposer une stratégie pour le
futur de l’outil ERA-NET.
Réflexion sur le financement de grands projets de RDI, combinant
1
différentes sources de financement afin d’accroitre le nb de projets crossproject
KET financés.
26. 3.6
1
Call for FoF –
Factories of the Future
The Factories of the Future Public-Private Partnership (PPP) initiative aims
at helping EU manufacturing enterprises, in particular SMEs, to adapt to
global competitive pressures by developing the necessary key enabling
technologies to support EU manufacturing across a broad range of sectors.
help European industry to meet the increasing global consumer demand
for greener, more customised and higher quality products through the
necessary transition to a demand-driven industry with lower waste
generation and energy consumption.
projects are expected to be performed by industrial organisations
themselves.
27. 3.6
1
Appel 2014: Manufacturing & Processing
FoF - Factories of the Future
Optimisation de process de production selon différentes approches :
FoF.1
Process optimization of manufacturing assets
FoF.2
Manufacturing processes for complex
structures and geometries with efficient use
of material
FoF.3
Global energy and other resources efficiency
in manufacturing enterprises
FoF.4
Developing smart factories that are attractive
to workers
FoF.5
Innovative product-service design using
manufacturing intelligence
FoF.6
Symbiotic human-robot collaborations for safe
and dynamic multimodal manufacturing
systems
FoF.7
Support for the enhancement of the impact of
the FoF PPP projects
* Production adaptative et intelligente basée sur la cybernétique (CPS)
R&I +
ICT-NMP
* Méthode de contrôle intégrative de process
CSA
* Fabrication collaborative et mobile à gestion délocalisée,
* Production « zéro défaut » par prototypage laser.
Procédé de production de structures de formes complexes, permettant une
4-6
R&I réduction de l’utilisation de la ressource matière, du taux de pièces
défectueuses et de l’énergie consommée.
Evaluation des consommations (matière et énergie) dans les entreprises de
4-6
R&I production, nouveaux business modèles, nouvelle organisation, nouvelle
stratégie pour réduire ces consos.
Activité de démo basée sur de nouveaux modèles et outils pour une
5-7
I
meilleure utilisation des RH et une amélioration de la productivité
Conception de produit/service basée sur des systèmes de fabrication
"intelligente"intégrant des outils d'ingénierie et des logiciels, afin de
4-6
R&I
répondre aux exigences de qualité, d'adaptation au marché et d'impact
environnemental.
5-7
CSA
I
Démonstration de système de production automatisée reposant sur une
collaboration entre l'homme et le robot mieux sécurisée et plus efficace.
Rapprochement d'activités FoF en cours et collaboration étroite entre les
parties prenantes, afin d'améliorer l'exploitation et la dissémination des
résultats du programme.
28. 3.6
1
Call for FoF –
Factories of the Future
FoF 1 – 2014: Process optimisation of manufacturing assets
one of the three themes :
CPS-based process optimisation (Cyber-Physical Systems) for adaptive
and smart manufacturing systems bringing together novel concepts for CPS,
progress in advanced control and new modelling and simulation
technologies.
Collaborative and mobile manufacturing: Development of agile
collaboration tools for process optimisation of manufacturing assets across
the supply chain towards the Cloud-enabled Manufacturing Business Web.
Towards zero-failure laser-based manufacturing: Fast and accurate
process monitoring systems allowing feedback control of laser process
parameters in highly dynamic manufacturing processes.
Types of action: Research & Innovation Actions/ CSA
29. 3.6
1
Call for FoF –
Factories of the Future
FoF 2 – 2014: Manufacturing processes for complex structures and
geometries with efficient use of material
* Innovative resource-efficient manufacturing processes
* Innovative energy efficient machinery
* Developments in process control allowing both to cope with more recycling
in the process and to increase output quality
* TRL between 4-6.
* Type of action: Research & Innovation Actions
30. 3.6
1
Call for FoF –
Factories of the Future
FoF 3 – 2014: Global energy and other resources efficiency in
manufacturing enterprises
* Development and implementation of new business models aimed at
reducing energy and resource consumption along the whole or a relevant
part of the value chain
* Clustering of factories, suppliers or any other company
* Development of strategies for enabling energy characterisation of
enterprises
* Development of coherent detailed business cases, including economic,
strategic and commercial analysis, of the business models developed during
the project.
TRL ??
Type of action: Research & Innovation Actions
31. 3.6
1
Call for FoF –
Factories of the Future
FoF 4 – 2014: Developing smart factories that are attractive to
workers
* Methodologies and tools for efficient design or re-adaptation of
production facilities
* New methods and technologies for an optimised take-up and use of
workers' knowledge
* Integration of innovative production technologies supporting
increased productivity and flexibility.
* Incorporating aspects linked to education, workers' training and
attractiveness to youth (e.g. in-factory teaching, 'factory-lab'
concepts).
* TRL between 5-7.
* Type of action: Innovation Actions.
32. 3.6
1
Call for FoF –
Factories of the Future
FoF 6 – 2014: Symbiotic human-robot collaborations for safe and
dynamic multimodal manufacturing systems
* demonstrating the multimodal manufacturing systems (e.g. systems
combining visual, auditory and haptic interfaces) + R&D activities supporting
integration and scale-up
* Safety of the worker
* Human-Robot interaction
TRL between 5-7
Type of action: Innovation Actions.
34. 3.7
1
Call for EeB
Energy-efficient Buildings
The objective of the Energy-efficient Buildings Public-Private Partnership
(PPP) Initiative is to drive the creation of a high-tech building industry which
turns energy efficiency into a sustainable business, fostering EU
competitiveness in the construction sector on a global level.
implement and optimise building and district concepts that have the
technical, economic and societal potential to drastically reduce energy
consumption and decrease CO2 emissions
delivering new building technologies, materials and components for
energy saving and energy generation, thermal energy storage systems,
advanced insulation systems, thermal distribution systems, lighting, windows
and glazing, energy generation systems based on renewable sources.
35. 3.7
Appel 2014: Manufacturing & Processing
1
EeB – Energy-efficient Buildings
EeB.1 Materials for building envelope
Adaptable envelopes integrated in building
refurbishment projects
Development of new self-inspection
EeB.3 techniques and quality check measures for
efficient construction processes
Support for the enhancement of the impact of
EeB.4
EeB PPP projects
EeB.2
6+
I
4-6
R&I
4-6
R&I
CSA
Développement de nouveaux matériaux ou composants d’enveloppe à plus
faible contenu énergétique et propriétés d’isolation améliorées
Amélioration des caractéristiques de toit et façade pour s’adapter à des
environnements changeants. Baisse de consommation.
Nouvelle technique d’autodiagnostic portable permettant de contrôler
pendant la phase de construction les performances attendues (thermique,
phonique, qualité de l’air), d’éviter les ponts thermiques,…
Cluster d’activités EeB existantes pour favoriser leur exploitation et
dissémination.
SPIRE – Sustainable Process Industries
SPIRE.1 Integrated process control
3-5
R&I
Adaptable industrial processes allowing the
SPIRE.2 use of renewables as flexible feedstock for
chemical and energy applications
5-7
I
5-7
I
SPIRE.3
Improved downstream processing of mixtures
in process industries
Methodologies, tools and indicators for crosssectorial sustainability assessment of energy
SPIRE.4
and resource efficient solutions in the process
industry
CSA
Technologies de contrôle de process en temps réel (capteurs miniaturisés,
traitement de données, stratégie de contrôle) pour réduction des
ressources, adaptation et flexibilité
Nouveaux procédés de valorisation des résidus organiques et gazeux
renouvelables, comme matière première pour la production de substances
chimiques ou de carburants, prenant en compte les variations diurnes et
saisonnières
Procédé de production permettant de réduire en aval les coûts de
séparation, purification. Typiquement la production continue vs en batch,
les microréacteurs (sélectivité améliorée)
Etude multi-sectorielle sur les industries de process afin d’identifier et de
partager les bonnes pratiques et les besoins de RDI, pour une meilleure
efficacité de l’utilisation des ressources
36. 3.7
1
Call for EeB
Energy-efficient Buildings
EeB 1 – 2014: Materials for building envelope
•development of new materials and/or solutions for building envelope
components with reduced embodied energy, lower CO2 emissions
and improved insulation properties during operation
• improve indoor air quality, by limiting VOCs emissions and/or by
advanced properties aiming to absorb and biodegrade indoor
contaminants.
* TRL 6 and above.
* Type of action: Innovation Actions.
37. 3.7
1
Call for EeB
Energy-efficient Buildings
EeB 2 – 2014: Adaptable envelopes integrated in building
refurbishment projects
• advanced materials or technologies for energy generation and storage
• smart and performance insulation materials
• near infrared reflecting and cool coatings; adaptable innovative pre-cast
solutions
• strategies for improved air quality, moisture control, ventilation control and
energy recovery
• enhanced acoustic properties; …
TRL between 4-6.
Type of action: Research & Innovation Actions
38. 3.7
1
Call for EeB
Energy-efficient Buildings
EeB 3 – 2014: Development of new self-inspection techniques
and quality check measures for efficient construction processes
• focus on new self-inspection techniques and quality check
measures for efficient construction processes enabled by portable
and robust systems that can be easily handled in the construction site
• avoid or reduce economic and time deviations of the construction
processes.
* TRL between 4-6.
* Type of action: Research & Innovation Actions
40. 3.8
Appel 2014: divers
1
SILC - Sustainable Industry Low Carbon II
SILC II Sustainable Industry Low Carbon
5-7
50%
Solutions (non)technologiques pour réduire les GES dans les industries
manufacturières
Fast Track to Innovation - Pilot
ICT-29
Development of novel materials and systems
for OLED lighting
Moving towards a circular economy through
WASTE.1
industrial symbiosis
ICT-NMP
SC5NMP
R&I Nouveaux matériaux, procédés et dispositifs pour l'éclairage OLED, pour une
small rupture en cout/performance et en consommation énergétique;
I
Procédés et services innovants permettant d’accroitre la durée de vie d’un
produit ou de ses composants (via leur valorisation) et réduire ainsi la
production de déchets
41. 3.9
1
Call for Biotechnologies
Cutting-edge biotechnologies as future
innovation drivers
cutting edge-biotechnologies are paramount to assure that the
European industry is to stay at the front line of innovation, also
in the medium and long term.
synthetic biology : influence, or even transform a range of
areas of our economy and society.
bioinformatics : clear-cut limits on the ability to realize the full
value of biotechnology.
42. 3.9
1
Appels 2014-2015: Biotechnologies
BIOTECHNOLOGY 2014
1
Synthetic biology – design of organisms for
new products and processes
3-5
R&I
3
Widening industrial application of enzymatic
processes
5-7
I
4
Downstream processes unlocking
biotechnological transformations
5-7
I
Biologie synthétique pour la construction et la refonte de systèmes
biologiques non naturels, en vue d’applications en santé, chimie,
environnement. Ethique et évaluation risques.
Développement de biocatalyseurs pour de nouvelles synthèses chimiques à
large échelle
Accroître la productivité des bioprocédés en améliorant les opérations en
aval de séparation, purification,…afin de les rendre économiquement
viable.
BIOTECHNOLOGY 2015
2
New bioinformatics approaches in service of
biotechnology
3-5
R&I
Nouvelle approche en bioinformatique au service de la biotechnologie
5
Metagenomics as innovation driver
3-5
R&I
La métagénomique comme moteur d'innovation
43. 3.9
1
Call for Biotechnologies
Cutting-edge biotechnologies as future
innovation drivers
BIOTEC 1 – 2014: Synthetic biology – construction of organisms for
new products and processes
* aiming on innovative approaches for different industrially relevant products:
artificial design and/or simplification of the genomes and their use for the
predictable engineering of biotechnological applications; the design of robust
and sustainable biomolecular circuits and pathways as well as the need to
develop standards and creation of orthogonal biological systems.
* TRL between 3 and 5.
* Type of action: Research & Innovation Actions
44. 3.9
1
Call for Biotechnologies
Biotechnology-based industrial processes
driving competitiveness and sustainability
BIOTEC 3 – 2014: Widening industrial application of enzymatic
processes
* Development of specific robust biocatalysts for application at a large scale:
oxidoreductases, oxygenases, lyases.
design and development of generic platform technologies and methods
for fast and accurate enzyme activity determination and enzyme optimization
enabling the design of highly efficient biocatalysts with an expanded range of
substrates and for industrially important conversions.
* TRL between 5 and 7.
* Type of action: Innovation Actions (70%)
45. 3.9
1
Call for Biotechnologies
Biotechnology-based industrial processes
driving competitiveness and sustainability
BIOTEC 4 – 2014: Downstream processes unlocking
biotechnological transformations
* develop and demonstrate downstream processes which overcome
the often low and complex productivity of bioprocesses: in-situ
product removal, separation and purification technologies, newly
developed materials (e.g. membranes, adsorbents, resins, etc.),
reliable scale-up methods.
*TRL between 5 and 7.
*Type of action: Innovation Actions
47. 3.10
1
Call for SPIRE –
The SPIRE Public-Private Partnership (PPP) brings together
cement, ceramics, chemicals, engineering, minerals and ores,
non-ferrous metals, steel and water sectors, several being worldleading sectors operating from Europe.
integration of relevant training/learning as well as identify
appropriate business models to ensure subsequent market
implementation and potential barriers for cross sectorial
technology transfer
48. 3.10
Appel 2014: Manufacturing & Processing
1
EeB – Energy-efficient Buildings
EeB.1 Materials for building envelope
Adaptable envelopes integrated in building
refurbishment projects
Development of new self-inspection
EeB.3 techniques and quality check measures for
efficient construction processes
Support for the enhancement of the impact of
EeB.4
EeB PPP projects
EeB.2
6+
I
4-6
R&I
4-6
R&I
CSA
Développement de nouveaux matériaux ou composants d’enveloppe à plus
faible contenu énergétique et propriétés d’isolation améliorées
Amélioration des caractéristiques de toit et façade pour s’adapter à des
environnements changeants. Baisse de consommation.
Nouvelle technique d’autodiagnostic portable permettant de contrôler
pendant la phase de construction les performances attendues (thermique,
phonique, qualité de l’air), d’éviter les ponts thermiques,…
Cluster d’activités EeB existantes pour favoriser leur exploitation et
dissémination.
SPIRE – Sustainable Process Industries
SPIRE.1 Integrated process control
3-5
R&I
Adaptable industrial processes allowing the
SPIRE.2 use of renewables as flexible feedstock for
chemical and energy applications
5-7
I
5-7
I
SPIRE.3
Improved downstream processing of mixtures
in process industries
Methodologies, tools and indicators for crosssectorial sustainability assessment of energy
SPIRE.4
and resource efficient solutions in the process
industry
CSA
Technologies de contrôle de process en temps réel (capteurs miniaturisés,
traitement de données, stratégie de contrôle) pour réduction des
ressources, adaptation et flexibilité
Nouveaux procédés de valorisation des résidus organiques et gazeux
renouvelables, comme matière première pour la production de substances
chimiques ou de carburants, prenant en compte les variations diurnes et
saisonnières
Procédé de production permettant de réduire en aval les coûts de
séparation, purification. Typiquement la production continue vs en batch,
les microréacteurs (sélectivité améliorée)
Etude multi-sectorielle sur les industries de process afin d’identifier et de
partager les bonnes pratiques et les besoins de RDI, pour une meilleure
efficacité de l’utilisation des ressources
49. 3.10
1
Call for SPIRE –
Sustainable Process Industries
SPIRE 1 – 2014: Integrated Process Control
* Development of new technologies in:
Cross-sectorial application of process analyser technology (PAT) and product
measurement techniques (PPMT) in closed-loop process control capable of inline
measurements.
Integration methodologies within a large number of production conditions.
Swarm sensors.
Development of new soft-sensors and sensing concepts and models for improved
process control using PAT data for the measurement of properties and quality of
process streams and final products.
Miniaturised PAT- and PPMT-based advanced control for intensified processes.
Disposable sensors in batch and in continuous processes.
Control strategies for flexible processes or disposable sensors using integrated and
validated PAT data.
Process and Product life cycle management.
* TRL 3-5.
* Type of action: Research & Innovation Actions
50. 3.10
1
Call for SPIRE –
Sustainable Process Industries
SPIRE 2 – 2014: Adaptable industrial processes allowing the use
of renewables as flexible feedstock for chemical and energy
applications
* develop new processes or improved valorisation approaches that
would provide efficient biomass, residue and waste gas conversion
(or biomass pre-treatment for further refining) while developing a fully
integrated system and the associated equipment for downstream use.
Substantial demonstration activities in conjunction with the
development of solution-adapted equipment are expected.
* TRL 5-7.
* Type of action: Innovation Actions
51. 3.10
1
Call for SPIRE –
Sustainable Process Industries
SPIRE 3 – 2014: Improved downstream processing of
mixtures in process industries
* Develop new technologies for
Compatibility with continuous processes
Reduction of production costs and time to market
Significant improvements in energy and resource efficiency
Significant reduction in greenhouse gas emissions.
Improvement in safety of the work environment.
* TRL 5-7.
* Type of action: Innovation Actions
53. 4
1
WP NMP 2014-2015
1. Overcome the death valley
→ Bridging the gap between nanotechnology research and markets
→ Exploi%ng the cross-sector poten%al of Nanotechnologies and Advanced materials to
drive competitiveness and sustainability
2. NM addressing societal challenges
→ Nanotechnology and Advanced Materials for more effec%ve Healthcare
→ Nanotechnology and Advanced Materials for low carbon energy technologies and Energy
Efficiency
3. Overraching aspects of NMP
→ Safety of nanotechnology-based applica%ons and support for the development of
→ Addressing generic needs in support of governance, standards, models and structuring in
nanotechnology, advanced materials and production
4. Advanced manufacturing and processing: 3 PPP
→ FoF - Factories of the Future
→ EeB – Energy-efficient Buildings
→ SPIRE – Sustainable Process Industries
5. Biotechnologies et divers
54. 4.1
1
Appel 2015: Overcome the death valley
Bridging the gap between nanotechnology research and markets
2
3
Integration of novel nano materials into
existing production lines
Manufacturing and control of nanoporous
materials
5-6 to 7
I
Intégration de nouveaux matériaux nano dans les lignes de production
existantes
4-5 to 6
I
Ligne de fabrication et contrôle de matériaux nanoporeux
6
Novel nanomatrices and nanocapsules
4-5
R&I
Nouvelles nanomatrices et nanocapsules, sureté
7
Additive manufacturing for tabletop
nanofactories
4-5
R&I
Incorporation d'additifs "nano" dans une chaine de production pour de
nouveaux produits intégrant de nouvelles fonctions
Exploiting the cross-sector potential of Nanotechnologies and Advanced materials to drive competitiveness and sustainability
19
22
23
24
25
26
Materials for severe operating conditions,
5
including added-value functionalities
Fibre-based materials for non-clothing
5-6
applications
Novel materials by design for substituting
3-4
critical elements
Low-energy solutions for drinking water
4-5 to 6production
7
Inducement prize for the dev. of new materials
and materials-based creative solutions by
PRIZE
upstream coll.between materials scientists and
designers
Accelerating the uptake of nanotechnologies,
advanced materials or advanced manufacturing
and processing technologies by SME
R&I
I
R&I
I
SME instrument
Matériaux pour les conditions de fonctionnement sévères, présentant
également de nouvelles fonctionnalités à valeur ajoutée
Matériaux à base de fibres pour des applications hors habillement
Nouveaux matériaux par conception pour substituer des éléments critiques
Solutions à faible consommation d'énergie pour la production d'eau potable usines pilotes
Prix d'incita%on pour le développement de nouveaux matériaux et de
solutions créatives à base de matériaux reposant sur une collaboration entre
les scientifiques des matériaux et des designers
Accélérer le transfert de technologie des NM, en 3 phases : faisabilité (50k€),
activités d’innovation, plan de développement et de commercialisation
55. 4.2
1
Appel 2015: Addressing societal challenges
Nanotechnology and Advanced Materials for more effective healthcare
11
Nanomedicine therapy for cancer
12
Biomaterials for treatment and prevention of
Alzheimer’s disease
4-5 to 67
R&I
Thérapie issue de la nanomédecine pour le traitement du cancer
5
R&I
Biomatériaux pour le traitement et la prévention de la maladie d'Alzheimer
Nanotechnology and Advanced Materials for low carbon energy technologies and Energy Efficiency
14
15
16
ERA-NET on Materials
Materials innovations for the optimisation of
cooling in power plants
Extended in-service life of advanced functional
materials in energy technologies (capture,
conversion, storage and/or transmission of
energy)
ERA-NET
6
6
COFUND
ERA-NET sur les matériaux y compris pour l'énergie
10M€
Matériaux innovants pour l'optimisation du refroidissement dans les
I
centrales électriques
I
Prolonger la durée de vie des matériaux fonctionnels avancés « en-service »
dans les technologies énergétiques (capture, transformation, stockage et /
ou transport de l'énergie)
56. Appel 2015: Overarching aspects
4.3
1
Safety of nanotechnology-based applications and support for the development of regulation
30
31
Increa s i ng the ca pa city to perform
na nos a fety a s s es s ment
Next genera ti on tool s for ri s k governa nce
of Na noma teri a ls
4
100%
5
100%
Renforcer la ca pa cité d'effectuer une éva l ua ti on en
na nos écuri té
Outi l s de procha ine généra ti on pour l a ges ti on des ri s ques
a s s oci és a ux na noma téria ux
Addressing generic needs in support of governance, standards, models and structuring in nanotechnology, advanced
materials and production
33
Soci eta l enga gement on res pons i bl e
na notechnology
CSA
41
Pres i dency events
CSA
1 project
Enga gement
res pons a bl es
s ociéta l
pour
des
na notechnol ogies
57. 4.4
1
Appel 2015: Manufacturing & Processing
FoF - Factories of the Future
FoF.8
ICT-enabled modeli ng, s i mul ation,
anal ys i s and forecas ting technol ogi es
FoF.9 ICT i nnovation for Manufacturing SME
ICTNMP
ICTNMP
R&I + La modéli s a ti on, la s imul a ti on, l'a nal ys e et les technologies
CSA prédi ctives
I+CSA Innova tion dans les TIC pour l es PME ma nufacturi ères
Ma nufa cturi ng of cus tom ma de pa rts for
pers ona l is ed products
4-6
R&I
Flexi bl e producti on s ys tems bas ed on
FoF.11 integra ted tool s for ra pi d
reconfigura tion of machi nery and robots
5-7
I
Sys tèmes de production fl exi bles ba s és s ur des outil s i ntégrés
pour l a reconfi gura ti on rapide des machi nes et robots
5-7
I
Technol ogi es i ndus triell es de pointe pour l es procédés
d'a s s embl a ge de mul ti -ma téri a ux
4-6
R&I
Technol ogi es et équi pements pour réutil is er, refa briquer, pour
une ges ti on durabl e du produi t
4-6
R&I
La concepti on intégrée et la ges tion des ma chi nes et procédés de
production
FoF.10
Indus tri al technologi es for adva nced
FoF.12 joi ni ng a nd a s s embl y proces s es of multi ma teri a ls
Reus e, rema nufacturi ng technol ogi es
FoF.13 and equi pment for s us ta inable product
li fe cycle ma na gement
Integra ted des ign and mana gement of
FoF.14
producti on machinery a nd proces s es
Fabri ca ti on de pièces fa ites s ur mes ure pour l es produi ts
pers onna li s és
Titre - Date – N° page
58. 4.5
1
Appel 2015: Manufacturing & Processing
EeB – Energy-efficient Buildings
Innovative design tools for refurbishment at
building and district level
Integrated solutions of thermal energy storage
EeB.6
for building applications
New tools and methodologies to reduce the
gap between predicted and actual energy
EeB.7
performances at the level of buildings and
blocks of buildings
Integrated approach to retrofitting of
EeB.8
residential buildings
EeB.5
5-7
I
4-6
R&I
Outils de conception innovante pour la rénovation au niveau du bâtiment et
du district
Solutions intégrées de stockage d'énergie thermique pour des applications
dans la construction
5-7
I
Nouveaux outils et méthodologies visant à réduire l'écart entre les
performances énergétiques prévus et réels au niveau des bâtiments et des
ensembles.
5-7
I
Validation d'une approche intégrée de rénovation de bâtiments
résidentiels
SPIRE – Sustainable Process Industries
SPIRE.5
New adaptable catalytic reactor methodologies
for Process Intensification
3-5
R&I
Nouvelles méthodologies pour des réacteurs catalytiques adaptables à
l'intensification des procédés
SPIRE.6
Energy and resource management systems for
improved efficiency in the process industries
4-6
R&I
Systèmes de gestion de l'énergie et des ressources pour améliorer
l'efficacité d'industries de transformation
5-7
I
Technologies de récupération de métaux et autres minéraux
5-7
I
Management de solides dans une unité de production en continu via une
intensification des procédés
Recovery technologies for metals and other
minerals
Solids handling for intensified process
SPIRE.8
technology
SPIRE.7
59. Autres thèmes liés à NMP (1/3)
5
1
Pilier 1:
Infrastructures, ERC, FET ProActive (pas dans 1er appel),
FET Flagship Graphene
Pilier 2:
ICT:
ICT 2-3 A new generation of components and systems
ICT 25-26-27-28 Micro-nano electronics, photonics
Space: COMPET 2 – 2014: Independent access to space (nouveaux matériaux
pour structures légères)
COMPET 4 – 2014: Space Robotics Technologies (capteurs,
actionneurs, matériaux et structures)
COMPET 6 – 2014: Bottom-up space technologies at low TRL
(matériaux avancés)
COMPET 2 – 2015: Independent access to space (matériaux avancés)
COMPET 3 – 2015: Bottom-up space technologies at low TRL
(matériaux avancés)
Instrument PME / Fast track
60. 5.1
1
Autres thèmes liés à NMP (2/3)
Pilier 3:
SC1 (Santé): PH 9-2014 Development of new diagnostic tools and technologies: in
vitro devices, assays and platform (nanotechnologie + microfluidique)
PH15-2015 Tools and technologies for advanced therapies
(biomatériaux)
SC2 (Agro): ISIB 5-2014, ISIB 6-2015, ISIB 7-2014 Sustainable and
competitive bio-based industries (biomasse, bioraffinerie, biofuels, lien avec SPIRE)
SC3 (Energie):
EE 13- 2014/15 Technology for district heating and cooling
(matériaux isolants)
LCE 1 – 2014 New knowledge and technologies (matériaux et
système de production avancés)
LCE 2 – 2014/15: Developing the next generation technologies
of renewable electricity and heating/cooling (matériaux à bas coût)
LCE 3 – 2014/2015: Demonstration of renewable electricity and
heating/cooling technologies (matériaux pour le photovoltaïque)
LCE 10 – 2014: Next generation technologies for energy
storage (nouveaux matériaux)
LCE 11-2014/2015, LCE 12-2014/2015, LCE 13-2015,
LCE 14-2014/2015 Sustainable biofuels and alternative fuels for
the European transport fuel mix (biomasse, bioraffinerie, biofuels, lien avec SPIRE)
61. 5.2
1
Autres thèmes liés à NMP (3/3)
SC4 (Transport): MG.1.5-2014-2015.International cooperation in aeronautic
(nouveaux matériaux et procédés de fabrication, matériaux composites)
MG.4.1-2014.Towards the energy efficient and emission free vessel
(nouveaux matériaux)
MG.8.1-2014.Smarter design, construction and maintenance
(matériaux auto- cicatrisant et auto-nettoyant, application des nanotechnologies
aux coatings)
GV.1-2014 Next generation of batteries for fully electric auto.
Applications
SC5 (Envt): Waste.1 Moving towards a circular economy through industrial symbiosis
Waste 3 Recycling of raw materials from products and buildings
H2020 – SC5_10 – 2014/2015: New solutions for sustainable production
of raw materials (ex: nouveaux systèmes métallurgiques)
H2020 – SC5_11 – 2014/2015 Innovative and sustainable solutions
leading to substitution of raw material (nouveaux matériaux pour l’électronique,
matériaux sous conditions extrêmes)
EIT/KIC:
Raw Materials (2014) – Manufacturing (2016)
Art 185:
Eurostars (PME) – Empir (Metrology)
63. 6.1
1
NMP: l’animation nationale
RCP: Représentant au Comité Programme
Gilles Le Marois
Fabrice Leroy
MESR
MRP
gilles.le-marois@recherche.gouv.fr
fabrice.leroy@finances.gouv.fr
PCN: Point de Contact National
Gilles Le Marois (coord.) CEA
Lucie Vaucel
CPU
Sébastien Leroy
IRT
Abdelilah Slaoui
CNRS
gilles.le-marois@cea.fr
lucie.vaucel@univ-lr.fr
sebastien.leroy@irt-jules-verne.fr
abdelilah.slaoui@icube.unistra.fr
S’appuie sur le futur site web FR, à forte visibilité
http://www.horizon2020.gouv.fr
64. Manifestations organisées par le PCN
6.2
1
Brokerage event à Strasbourg le 29 novembre
-
Co-organisé avec le PCN allemand, ouvert à tout partenaire EU
3 temps forts :
· Session plénière en présence de la Commission Européenne,
· Ateliers thématiques parallèles avec présentation de
projets/idée/expertise (thèmes NMP et en lien avec dans d’autres programmes)
· Rendez-vous de partenariat en face à face
http://www.b2match.eu/kets2014/
Séminaire FR-IT à Grenoble, les 21-22 octobre
-
3
·
·
·
temps forts :
Présentation des activités et compétences des organismes,
Présentation d’idées de projets,
Rendez-vous de partenariat en face à face
65. 6.3
1
Manifestations organisées par le PCN
Infodays en Région, calendrier
Date
Lieu
CD
27/09/2013
21/10/2013
08/11/2013
12/11/2013
12/11/2013
15/11/2013
19/11/2013
19/11/2013
21/11/2013
22/11/2013
29/11/2013
02/12/2013
10/12/2013
13/12/2013
07/01/2014
sem II-2014
sem III-2014
Grenoble
Grenoble
Limoges
NPdC+Picardie
Pays de Loire
Lorraine-IRT
Toulouse
Tours
Limoges
Montpellier
Alsace+Ch Ardennes
Bordeaux
Bourgogne-Fr C
Aix-Marseille
Clermont-Ferrand
Poitou-Charentes
Sorbonne Paris Cité
Animateur PCN
LV
SL
AS GLM
Format
X
X
X
Séminaire FR-IT
Table ronde
X
X
Brokerage event
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Contact Région
Elodie Wagner
Elodie Wagner
Martin Forst
Catherine Dupas
Gaetan Drouet
Nathalie Hiesiger
Christine Guidice
Aurélie Uchard
Martin Forst
Conception Avila
Isabelle Gouriou
Caroline Angeli
Laurent Volle
Nicolas Chéhanne
Claire Soriano
Frédéric Suche
Amélie Antoine
66. 6.4
1
Manifestations organisées par le PCN
Infodays en Région, format:
Présentation de H 2020, de ses règles de participation et de ses règles
financières. Différences avec FP7.
Présentations des différents dispositifs régionaux d’accompagnement au
montage de projets
Présentation du programme de travail. Présentation éventuelle selon les
régions des synergies entre le programme de travail et la S3.
RDV B to B entre chercheurs, industriels, cellules d’ingénierie de projets et
Points de Contact Nationaux
67. Actions MESR
6.5
1
15 octobre 2013: Lancement du portail français
dédié au programme Horizon 2020
http://www.horizon2020.gouv.fr/
OBJECTIFS:
• Accompagner la communauté scientifique et industrielle vers le nouveau programme Horizon 2020
• Permettre la transition entre le 7ème PCRD et le nouveau programme Horizon 2020
• Faciliter l’accès à l’information sur les programmes européens
• Se renseigner auprès des 20 nouveaux Points de Contacts Nationaux (P.C.N.).
LES POINTS FORTS DU PORTAIL:
• Recensement des ressources disponibles sur Horizon 2020
• Valorisation des actualités sur les appels à projets
• Informations pratiques pour répondre aux appels à propositions
• Espace dédié à la recherche de partenaires
• Alertes par domaine
• Lettres d’information
• Moteur de recherche spécifique
• Valorisation des manifestations organisées en France sur chacun des programmes d’Horizon 2020.
68. 6.6
1
Actions MESR
Lancement du programme Horizon 2020:
Les sessions nationales
OBJECTIFS :
• Faire connaître les différentes priorités et programmes d’Horizon 2020
• Faire connaître ce qui change par rapport au 7ème PCRDT
• Préparer techniquement la communauté à répondre aux appels.
DESCRIPTION :
• Une vingtaine de sessions d’information/formation d’une demi-journée chacune, ciblées sur des
communautés, faisant intervenir des spécialistes de chaque domaine
• Mise en ligne de tous les contenus présentés sur www.horizon2020.gouv.fr
• 4000 participants attendus.
69. Actions MESR
6.7
1
Lancement du programme Horizon 2020:
Le calendrier des sessions nationales
Jour
Session matin
Session après midi
7/11/2013
Infrastructures
Poincaré
25/11/2013
Lancement
HORIZON 2020
Grands Principes & Mise en Œuvre
Présentation du Dispositif
d’accompagnement
Poincaré
Règles de participation
Modèles de coûts
Poincaré
26/11/2013
RdP – Convention de subvention
Poincaré
RdP – propriété Intellectuelle
Poincaré
27/11/2013
ERC
Poincaré
Actions Marie Slodowska Curie
Poincaré
28/11/2013
1- Santé, démog, Bien ëtre
Poincaré
2 - Défis de la bioéconomie &
biotech
Poincaré
29/11/2013
KET in HORIZON 2020 –( NMP)
Strasbourg ( Conseil
Régional)
2/12/2013
Transport
Poincaré
FET
3/12/2013
6 -Société innovantes etc
Poincaré
SSH dans HORIZON 2020
Poincaré
4/12/2013
TIC ??
Poincaré
TIC ??
Poincaré
5/12/2013
Espace
CNES ou
Poincaré
6/12/2013
PME dans H2020 ???
17/12/2013
Energie
DGCIS /BPI
Poincaré
Accès aux financements a
Risques ???
Environnement
MESR
DGCIS
Poincaré
70. 6.8
1
Actions MESR
Lancement du programme Horizon 2020:
Les sessions en région
OBJECTIFS :
• Faire connaître les différentes priorités et programmes d’Horizon 2020 à l’ensemble de la communauté FR de
RDI
• Faire connaître ce qui change par rapport au 7ème PCRDT
• Préparer techniquement la communauté à répondre aux appels.
DESCRIPTION :
• Des interventions des PCN sur tout le territoire, en interaction avec les acteurs du dispositif
d’accompagnement
• Alerte sur ces manifestations sur www.horizon2020.gouv.fr
• Une centaine de réunions prévues.
71. 6.9
1
Actions MESR
Le 16 décembre: Manifestation de
lancement du programme Horizon 2020
OBJECTIFS :
• Donner le coup d’envoi FR du programme Horizon 2020
• Montrer notre résolution FR à s’engager au plus haut niveau dans l’Europe de la recherche et de l’innovation
• Mobiliser la communauté de recherche et d’innovation (directeurs de laboratoires, chefs d’entreprise, jeunes
chercheurs, etc.).
DESCRIPTION :
• Manifestation festive et conviviale, point final d’une année de préparation à H2020
• 800 personnes attendues, présence de personnalités de la recherche, du gouvernement, de la CE
• Dans ce cadre, remise des Etoiles de l’Europe
• Face to face meeting avec les PCN.
72. 6.10
1
Actions MESR
Les Etoiles de l’Europe
OBJECTIFS :
• Honorer des équipes de chercheur-e-s et leur coordinat-eur-rice pour leur engagement européen et leur
travail de rassemblement et de coordination de projets
• Montrer que les équipes françaises de chercheur-e-s qui réussissent, font le “choix de l’Europe” pour la
recherche et l’innovation (effet d’entraînement)
• Marquer un temps annuel de rassemblement et de mobilisation dans la durée autour de la recherche et
l’Europe.
DESCRIPTION :
• 12 étoiles
• 3 catégories « Excellence scientifique », « Primauté industrielle », « Défis sociétaux »
• Un appel à candidatures (projets clos entre le 1er juillet 2012 et le 30 juin 2013)
• Un jury de sélection.