Par Mr Diby, Association Nationale des Semenciers de Côte d'Ivoire (ANASEMCI). Réunion de haut niveau sur les défis majeurs de l'heure du secteur en Côte d’Ivoire, Abidjan, les 11 et 12 août 2020.
Este documento presenta una lista y breves descripciones de varios proyectos arquitectónicos diseñados por David Chipperfield. Los proyectos incluyen locales comerciales, estudios de diseño, apartamentos, iglesias, museos y casas privadas en varios países como Reino Unido, Alemania, España, Japón y Estados Unidos. Los proyectos enfatizan el uso de materiales naturales, la atención a los detalles y la integración con el contexto.
The document discusses Libya's growing construction sector, using the Burj Al Baher Complex office building project as a case study. It outlines Libya's strong economic growth fueled by oil and gas reserves. Several major office and mixed-use building projects are currently under construction or planning in Tripoli, including the Burj Al Baher Complex which will feature an office tower, hotel, and apartments totaling 27,000 square meters. The project overview provides details on the project components, location, financing, and construction progress.
Finish ceilings serve several functions including visual, light and sound control, and concealing mechanical, electrical, and plumbing systems. There are several types of ceilings including exposed structure, tightly attached, suspended, and interstitial. Suspended ceilings are hung from the structure using wires or metal framing and allow for a plenum space above for ducts and pipes. They provide access for maintenance and are widely used with lay-in panels and grids. Interstitial ceilings are common in hospitals and laboratories to accommodate extensive mechanical systems while providing access.
The document contains construction drawings showing different types of foundations and foundation details including:
- Section drawings showing strip footings, column footings, strip beam foundations, and raft foundations with rebar specifications.
- Elevation drawings of rubble foundations and brick walls.
- Foundation details including damp proof course (DPC), lean concrete, mass concrete, and floor slabs on top of compacted earth.
This document provides an overview of a proposed rotating tower project in Dubai. It discusses the concept of dynamic architecture where buildings adjust their shape over time. The rotating tower would have 80 floors that each rotate independently, powered by horizontal wind turbines between floors. Each prefabricated floor module would be assembled on site using a lift system, greatly reducing construction time. The rotating floors and energy generation capabilities could make the tower more sustainable and earthquake resistant than static structures.
The document provides information about curtain walls from a lecture at Izmir University of Economics. It defines a curtain wall as a non-structural exterior wall supported by the building frame that carries only its own weight and wind loads. The document discusses the history of curtain walls, provides examples of curtain wall designs, and describes different curtain wall types and how they are constructed. It emphasizes that students will choose a curtain wall system and location for their building project.
Este documento presenta una lista y breves descripciones de varios proyectos arquitectónicos diseñados por David Chipperfield. Los proyectos incluyen locales comerciales, estudios de diseño, apartamentos, iglesias, museos y casas privadas en varios países como Reino Unido, Alemania, España, Japón y Estados Unidos. Los proyectos enfatizan el uso de materiales naturales, la atención a los detalles y la integración con el contexto.
The document discusses Libya's growing construction sector, using the Burj Al Baher Complex office building project as a case study. It outlines Libya's strong economic growth fueled by oil and gas reserves. Several major office and mixed-use building projects are currently under construction or planning in Tripoli, including the Burj Al Baher Complex which will feature an office tower, hotel, and apartments totaling 27,000 square meters. The project overview provides details on the project components, location, financing, and construction progress.
Finish ceilings serve several functions including visual, light and sound control, and concealing mechanical, electrical, and plumbing systems. There are several types of ceilings including exposed structure, tightly attached, suspended, and interstitial. Suspended ceilings are hung from the structure using wires or metal framing and allow for a plenum space above for ducts and pipes. They provide access for maintenance and are widely used with lay-in panels and grids. Interstitial ceilings are common in hospitals and laboratories to accommodate extensive mechanical systems while providing access.
The document contains construction drawings showing different types of foundations and foundation details including:
- Section drawings showing strip footings, column footings, strip beam foundations, and raft foundations with rebar specifications.
- Elevation drawings of rubble foundations and brick walls.
- Foundation details including damp proof course (DPC), lean concrete, mass concrete, and floor slabs on top of compacted earth.
This document provides an overview of a proposed rotating tower project in Dubai. It discusses the concept of dynamic architecture where buildings adjust their shape over time. The rotating tower would have 80 floors that each rotate independently, powered by horizontal wind turbines between floors. Each prefabricated floor module would be assembled on site using a lift system, greatly reducing construction time. The rotating floors and energy generation capabilities could make the tower more sustainable and earthquake resistant than static structures.
The document provides information about curtain walls from a lecture at Izmir University of Economics. It defines a curtain wall as a non-structural exterior wall supported by the building frame that carries only its own weight and wind loads. The document discusses the history of curtain walls, provides examples of curtain wall designs, and describes different curtain wall types and how they are constructed. It emphasizes that students will choose a curtain wall system and location for their building project.
3D printing, also known as additive manufacturing, builds a product layer by layer using a computer-controlled process. A CAD software program is used to design a 3D model, which is then sent to the 3D printer. The printer deposits material in successive layers, starting from the bottom, to construct the item. Applications of 3D printing include printed soil, emergency accommodations like housing, and cool bricks. 3D printed structures can achieve strengths of up to 10,000 psi, using hollow walls that save on materials while maintaining structural integrity.
The Politecnico di Milano is a leading technical university in Italy established in 1863. It has over 40,000 students spread across 7 campuses in Milan and other cities. The university is known for its schools of architecture, design, and engineering and produces many of Italy's engineers, architects, and industrial designers. It offers innovative degree programs and engages in cutting-edge research through over 130 laboratories.
This document summarizes information about carpet flooring, including different types of fibers used, dyeing and coloring methods, sustainability considerations, durability factors, tile backing options, and installation methods for both wall-to-wall and tile carpeting. It provides details on tools and steps for installing carpeting using tackless strips or adhesive for tiles. Advantages of carpeting include being soft, insulating, and easy to clean and maintain, while disadvantages can include flattening over time and retaining odors.
The Azuma House was one of Tadao Ando's earliest works. It is a concrete box split into daily living spaces around a central open-air courtyard. The courtyard acts as a hub, separating the living room from the kitchen/dining area and bathroom. Upstairs, bedrooms are located on either side of the courtyard, accessible by a bridge. The house shows a blind facade to the street with only a door indicating use of the space within.
The document discusses various earth-based building materials and techniques. It provides details on analyzing soil composition through various tests. Mud construction materials like cob, rammed earth, adobe, and stabilized mud bricks are explained. Cob involves shaping mud into egg-shaped masses and stacking them without forms. Rammed earth uses a form to compress damp soil mixtures into solid walls. Adobe involves shaping soil-straw mixtures into bricks that are sun-dried. Indigenous stabilizers like straw and plant juices can be used to improve soil properties for construction.
Structural glazing provides energy and daylight balance for a 4mm glass pane. A 4mm glass pane was analyzed for its energy transmission and daylighting potential when used in structural glazing applications. The analysis found that a 4mm thick glass pane in a structural glazing system achieves an optimal balance of energy transmission and daylighting.
Sustainability in built environment: Green Building Index (GBI) Platinum Cert...ESD UNU-IAS
The document discusses sustainability in the built environment and green building principles and certification systems. It provides information on:
- The objectives of green building, which include efficiently using resources, protecting health, and reducing pollution.
- Fundamental green building principles like siting and design efficiency, energy efficiency, water efficiency, and indoor environmental quality.
- Green building rating systems like LEED and Malaysia's Green Building Index (GBI), which assess sustainability in areas like energy use, materials, water, and indoor air quality.
- Examples of buildings that have achieved GBI Platinum, Gold, and Silver certification in Malaysia for implementing sustainable design and technologies.
This document provides an overview of Industrialized Building Systems (IBS) with a focus on precast concrete systems. It defines IBS and discusses the key types, including precast concrete, steel framing, formwork, blockwork, timber framing, and innovative systems. The advantages of IBS are faster construction, higher quality, and lower cost. Potential defects in precast concrete like water leakage and cracking are also outlined. The document presents the standard design and construction workflows for IBS and provides case studies of two apartment buildings in Singapore that utilized precast concrete systems.
1) The G Tower case study document discusses the passive design strategies used in the G Tower building in Kuala Lumpur, Malaysia. These strategies include building orientation, double glazing glass, vertical greenery, and more to reduce energy usage and improve indoor environmental quality.
2) Key passive design elements are building orientation adjusted to the northeast to minimize morning sun exposure, facade geometry subtraction, and use of double glazed low-emissivity glass to reduce heat transfer.
3) Additional sustainable features include rainwater harvesting, motion sensors, and green roofs to further reduce energy and water usage and improve indoor air quality.
The document discusses different natural building techniques using straw, cob, and light clay. It provides a brief history of straw bale construction in the 1800s Nebraska and describes how straw bales are used to form insulating and durable load-bearing walls. Cob construction is summarized as a mixture of clay, sand, straw and water used to create freeform walls that are structurally stable. Light clay techniques are also outlined as a German tradition of filling wood frames with straw or other materials coated in clay slip.
Este documento presenta cuatro modos de habitar del siglo XX a través de casos emblemáticos: la Casa con Patio de Mies van der Rohe de 1938, la Unidad de Marsella de Le Corbusier de 1951, las Casas Estudio de Charles y Ray Eames de 1948-1958, y la Casa Nómade de Toyo Ito de 1984. Cada caso refleja las ideas filosóficas y culturales de su época respecto al individuo, la sociedad, la tecnología y el habitar.
O documento descreve a Casa Lemke projetada por Mies van der Rohe em 1932-1933 em Berlin. A casa foi projetada com base em um módulo de 11x11 cm e emprega proporções áureas. As aberturas e divisões internas são organizadas em uma grade modular de 12x12 módulos.
A double roof is a roof structure that requires an intermediate support beam halfway between the roof's ridge and wallplate, known as a purlin, to support the rafters since they are of a length that exceeds an ordinary roof. A double roof design allows for ventilation in the space between the roofs and can catch wind at high velocities. They are commonly used in tropical climates for their benefits of reducing heat gain. Double pitched roofs are a traditional roof type supported by load-bearing walls and the ridge, and can be classified as symmetrical or asymmetrical depending on whether the roof surfaces are equal or differ in length and area.
3D printing allows architects to test design concepts faster by creating physical models layer by layer directly from digital files, saving weeks of time compared to traditional modeling. It reduces costs by up to 75% and produces models for a few thousand dollars that previously cost $100,000. Architects can now 3D print fully functional metal structures like bridges that would be nearly impossible to construct by hand.
This document summarizes an audit of the air conditioning system in the CICA building. The building has three floors and houses informatics resources for the local community. The current HVAC system does not provide enough cooling, causing high indoor temperatures that damage hardware. The goals of the audit are to evaluate the correct cooling capacity needed for four zones, verify air distribution efficiency, and assess ventilation. Modifications are proposed, including installing a centralized air/water system with a chiller and individual cooling coils in control units to better meet demand. Problems with the current system are also outlined.
The document discusses various topics related to interior design including recommended flooring options for cafes such as terrazzo, marble, and linoleum. It also discusses color psychology and how different colors like orange can represent energy and happiness while gray walls can make a living room feel more spacious. Formal interior design styles using symmetrical elements are mentioned as well as the importance of materials in interior design and selecting environmentally sustainable materials.
This document discusses architectural diagrams and their uses. It defines architectural diagrams as diagrams that outline relationships and boundaries between building components, providing an overall view of a project. The document outlines different types of architectural diagrams including planimetric, sectional, axonometric, programmatic, contextual, and circulation diagrams. It also discusses how to make exploded view and parti diagrams, with examples. The purpose of diagrams is to break down communication barriers, reach a shared understanding, and reduce confusion about architectural concepts and projects.
AT1 - Characteristics of Biomorphic Design Condensed.pptxrosscairnsUHI
Biomorphic / biophilic architecture draws inspiration from natural shapes and patterns found in nature. It emphasizes collaboration between humans and nature in architectural design. The style aims to connect building occupants more closely to the natural world through design elements like biomorphic shapes, natural lighting, ventilation, and landscape features. It seeks to integrate nature into the built environment for a more productive and healthy space.
Le dernier Briefing de Bruxelles sur le Développement numéro 54 sur le thème de «Agriculture durable : où en est la mise en œuvre des ODD ? » s’est tenu le mercredi 27 février 2019 (9:00 à 13:00) à la Commission européenne (bâtiment Charlemagne, salle Alcide de Gasperi ,rue de la Loi 170, 1040 Bruxelles).
Ce Briefing de Bruxelles a été organisé par le Centre technique de coopération agricole et rurale (CTA) en collaboration avec la Commission européenne (DG DEVCO), le Secrétariat ACP et la Confédération européenne des ONG d’urgence et de développement (Concord).
Rapport de développement durable Groupe Avril 2016Avril
Moteur de la croissance et de la pérennité d’Avril, la stratégie développement durable du Groupe a poursuivi son déploiement. L’année 2016 a été marquée par une montée en puissance, aboutissant à la formalisation de politiques ambitieuses, renforçant ainsi la visibilité des actions du Groupe et de son engagement autour du développement durable.
3D printing, also known as additive manufacturing, builds a product layer by layer using a computer-controlled process. A CAD software program is used to design a 3D model, which is then sent to the 3D printer. The printer deposits material in successive layers, starting from the bottom, to construct the item. Applications of 3D printing include printed soil, emergency accommodations like housing, and cool bricks. 3D printed structures can achieve strengths of up to 10,000 psi, using hollow walls that save on materials while maintaining structural integrity.
The Politecnico di Milano is a leading technical university in Italy established in 1863. It has over 40,000 students spread across 7 campuses in Milan and other cities. The university is known for its schools of architecture, design, and engineering and produces many of Italy's engineers, architects, and industrial designers. It offers innovative degree programs and engages in cutting-edge research through over 130 laboratories.
This document summarizes information about carpet flooring, including different types of fibers used, dyeing and coloring methods, sustainability considerations, durability factors, tile backing options, and installation methods for both wall-to-wall and tile carpeting. It provides details on tools and steps for installing carpeting using tackless strips or adhesive for tiles. Advantages of carpeting include being soft, insulating, and easy to clean and maintain, while disadvantages can include flattening over time and retaining odors.
The Azuma House was one of Tadao Ando's earliest works. It is a concrete box split into daily living spaces around a central open-air courtyard. The courtyard acts as a hub, separating the living room from the kitchen/dining area and bathroom. Upstairs, bedrooms are located on either side of the courtyard, accessible by a bridge. The house shows a blind facade to the street with only a door indicating use of the space within.
The document discusses various earth-based building materials and techniques. It provides details on analyzing soil composition through various tests. Mud construction materials like cob, rammed earth, adobe, and stabilized mud bricks are explained. Cob involves shaping mud into egg-shaped masses and stacking them without forms. Rammed earth uses a form to compress damp soil mixtures into solid walls. Adobe involves shaping soil-straw mixtures into bricks that are sun-dried. Indigenous stabilizers like straw and plant juices can be used to improve soil properties for construction.
Structural glazing provides energy and daylight balance for a 4mm glass pane. A 4mm glass pane was analyzed for its energy transmission and daylighting potential when used in structural glazing applications. The analysis found that a 4mm thick glass pane in a structural glazing system achieves an optimal balance of energy transmission and daylighting.
Sustainability in built environment: Green Building Index (GBI) Platinum Cert...ESD UNU-IAS
The document discusses sustainability in the built environment and green building principles and certification systems. It provides information on:
- The objectives of green building, which include efficiently using resources, protecting health, and reducing pollution.
- Fundamental green building principles like siting and design efficiency, energy efficiency, water efficiency, and indoor environmental quality.
- Green building rating systems like LEED and Malaysia's Green Building Index (GBI), which assess sustainability in areas like energy use, materials, water, and indoor air quality.
- Examples of buildings that have achieved GBI Platinum, Gold, and Silver certification in Malaysia for implementing sustainable design and technologies.
This document provides an overview of Industrialized Building Systems (IBS) with a focus on precast concrete systems. It defines IBS and discusses the key types, including precast concrete, steel framing, formwork, blockwork, timber framing, and innovative systems. The advantages of IBS are faster construction, higher quality, and lower cost. Potential defects in precast concrete like water leakage and cracking are also outlined. The document presents the standard design and construction workflows for IBS and provides case studies of two apartment buildings in Singapore that utilized precast concrete systems.
1) The G Tower case study document discusses the passive design strategies used in the G Tower building in Kuala Lumpur, Malaysia. These strategies include building orientation, double glazing glass, vertical greenery, and more to reduce energy usage and improve indoor environmental quality.
2) Key passive design elements are building orientation adjusted to the northeast to minimize morning sun exposure, facade geometry subtraction, and use of double glazed low-emissivity glass to reduce heat transfer.
3) Additional sustainable features include rainwater harvesting, motion sensors, and green roofs to further reduce energy and water usage and improve indoor air quality.
The document discusses different natural building techniques using straw, cob, and light clay. It provides a brief history of straw bale construction in the 1800s Nebraska and describes how straw bales are used to form insulating and durable load-bearing walls. Cob construction is summarized as a mixture of clay, sand, straw and water used to create freeform walls that are structurally stable. Light clay techniques are also outlined as a German tradition of filling wood frames with straw or other materials coated in clay slip.
Este documento presenta cuatro modos de habitar del siglo XX a través de casos emblemáticos: la Casa con Patio de Mies van der Rohe de 1938, la Unidad de Marsella de Le Corbusier de 1951, las Casas Estudio de Charles y Ray Eames de 1948-1958, y la Casa Nómade de Toyo Ito de 1984. Cada caso refleja las ideas filosóficas y culturales de su época respecto al individuo, la sociedad, la tecnología y el habitar.
O documento descreve a Casa Lemke projetada por Mies van der Rohe em 1932-1933 em Berlin. A casa foi projetada com base em um módulo de 11x11 cm e emprega proporções áureas. As aberturas e divisões internas são organizadas em uma grade modular de 12x12 módulos.
A double roof is a roof structure that requires an intermediate support beam halfway between the roof's ridge and wallplate, known as a purlin, to support the rafters since they are of a length that exceeds an ordinary roof. A double roof design allows for ventilation in the space between the roofs and can catch wind at high velocities. They are commonly used in tropical climates for their benefits of reducing heat gain. Double pitched roofs are a traditional roof type supported by load-bearing walls and the ridge, and can be classified as symmetrical or asymmetrical depending on whether the roof surfaces are equal or differ in length and area.
3D printing allows architects to test design concepts faster by creating physical models layer by layer directly from digital files, saving weeks of time compared to traditional modeling. It reduces costs by up to 75% and produces models for a few thousand dollars that previously cost $100,000. Architects can now 3D print fully functional metal structures like bridges that would be nearly impossible to construct by hand.
This document summarizes an audit of the air conditioning system in the CICA building. The building has three floors and houses informatics resources for the local community. The current HVAC system does not provide enough cooling, causing high indoor temperatures that damage hardware. The goals of the audit are to evaluate the correct cooling capacity needed for four zones, verify air distribution efficiency, and assess ventilation. Modifications are proposed, including installing a centralized air/water system with a chiller and individual cooling coils in control units to better meet demand. Problems with the current system are also outlined.
The document discusses various topics related to interior design including recommended flooring options for cafes such as terrazzo, marble, and linoleum. It also discusses color psychology and how different colors like orange can represent energy and happiness while gray walls can make a living room feel more spacious. Formal interior design styles using symmetrical elements are mentioned as well as the importance of materials in interior design and selecting environmentally sustainable materials.
This document discusses architectural diagrams and their uses. It defines architectural diagrams as diagrams that outline relationships and boundaries between building components, providing an overall view of a project. The document outlines different types of architectural diagrams including planimetric, sectional, axonometric, programmatic, contextual, and circulation diagrams. It also discusses how to make exploded view and parti diagrams, with examples. The purpose of diagrams is to break down communication barriers, reach a shared understanding, and reduce confusion about architectural concepts and projects.
AT1 - Characteristics of Biomorphic Design Condensed.pptxrosscairnsUHI
Biomorphic / biophilic architecture draws inspiration from natural shapes and patterns found in nature. It emphasizes collaboration between humans and nature in architectural design. The style aims to connect building occupants more closely to the natural world through design elements like biomorphic shapes, natural lighting, ventilation, and landscape features. It seeks to integrate nature into the built environment for a more productive and healthy space.
Le dernier Briefing de Bruxelles sur le Développement numéro 54 sur le thème de «Agriculture durable : où en est la mise en œuvre des ODD ? » s’est tenu le mercredi 27 février 2019 (9:00 à 13:00) à la Commission européenne (bâtiment Charlemagne, salle Alcide de Gasperi ,rue de la Loi 170, 1040 Bruxelles).
Ce Briefing de Bruxelles a été organisé par le Centre technique de coopération agricole et rurale (CTA) en collaboration avec la Commission européenne (DG DEVCO), le Secrétariat ACP et la Confédération européenne des ONG d’urgence et de développement (Concord).
Rapport de développement durable Groupe Avril 2016Avril
Moteur de la croissance et de la pérennité d’Avril, la stratégie développement durable du Groupe a poursuivi son déploiement. L’année 2016 a été marquée par une montée en puissance, aboutissant à la formalisation de politiques ambitieuses, renforçant ainsi la visibilité des actions du Groupe et de son engagement autour du développement durable.
La troisième journée des JEJ qu'organisaient la Synergie de la Jeunesse Camerounaise et le Groupement Interpatronal du Cameroun GICAM a été consacrée à l'entrepreneuriat agricole : AGROBIZ DAY. M. Christian FOSSO, DG de l'entreprise FIMEX a accordé une présentation sur les points suivants :
- Présentation de FIMEX INTERNATIONAL
- Agriculture : Levier d'accélération de la croissance
- Projet : Un patron, une plantation
- L'emploi dans le secteur agricole
Perspective future Agri Africaine WA Hub 2021 FR.pptxBenoît THIERRY
cette présentation indique les elements necessaires d áction et d'investissement pour nourrir la population croissante en afrique, compte tenu des elements economiques et du changement climatique.
Le briefing de Bruxelles sur le développement n. 57 sur « Investir dans l'agriculture paysanne pour la sécurité alimentaire et la nutrition » organisé par le CTA, la Commission européenne / EuropeAid, et le secrétariat ACP s'est tenu le mercredi 11 septembre 2019 de 9h00 à 13h00 au Secrétariat ACP, 451 Avenue Georges Henri, 1200 Bruxelles, Salle C. Ce briefing a examiné l’agriculture paysanne et son rôle clé dans la mise en œuvre de la sécurité alimentaire/nutrition et de systèmes alimentaires durables, comme l'illustre par l'ODD 2.
Le briefing de Bruxelles sur le développement n. 57 sur « Investir dans l'agriculture paysanne pour la sécurité alimentaire et la nutrition » organisé par le CTA, la Commission européenne / EuropeAid, et le secrétariat ACP s'est tenu le mercredi 11 septembre 2019 de 9h00 à 13h00 au Secrétariat ACP, 451 Avenue Georges Henri, 1200 Bruxelles, Salle C. Ce briefing aexaminé l’agriculture paysanne et son rôle clé dans la mise en œuvre de la sécurité alimentaire/nutrition et de systèmes alimentaires durables, comme l'illustre par l'ODD 2.
Les Agricultures Africaines - Transformations et perspectives : publié par le NEPAD lors du Sommet de l’Union Africain sur l’année de l’agriculture africaine.
Pour CULTIVONS investir dans l’agriculture/pastoralisme familiale est la solution pour sortir la région de la faim. Cela passe notamment par donner la voix aux femmes rurales. Développer une nouvelle économie rurale résiliente basée sur l’agriculture/pastoralisme familial doit être la priorité de la CEDEAO et de ses Etats membres! La révision de la politique agricole régionale (ECOWAP) en 2015 est l’opportunité à saisir !
CULTIVONS pose les bases d’une stratégie régionale 2015-2019 ambitieuse construite en bonne connexion avec les campagnes globale et panafricaine et en étroite articulation avec les acteurs CULTIVONS des pays et de la région.
Dans la droite ligne de sa stratégie pluriannuelle, CULTIVONS développe aussi son plan opérationnel avril2015-mars2016. La colonne vertébrale du travail collectif de CULTIVONS en Afrique de l’Ouest sera : les 10 ans de la politique agricole régionale (#ECOWAP+10). Le coup d’envoi en sera donné le 17 avril ! #CULTIVONS a #FaimDeChangement pour #AgricultureFamiliale § #Pastoralisme dans @ecowas_cedeao dans #ECOWAP10 : ensemble @TaclonsLaFaim !
Réflexion sur les principaux défis du secteur semencier en AfriqueMichela Paganini
Par Kouame Miezan , Directeur Exécutif d'AfricaSeeds
Réunion de haut niveau sur les défis majeurs de l'heure du secteur en Côte d’Ivoire, Abidjan, les 11 et 12 août 2020.
Présentation du Fonds Interprofessionnel pour la recherche et le conseil agricoles (FIRCA)
Réunion de haut niveau sur les défis majeurs de l'heure du secteur en Côte d’Ivoire, Abidjan, les 11 et 12 août 2020.
Par Martial YAPI, Coordination Nationale des Filières Céréales.
Réunion de haut niveau sur les défis majeurs de l'heure du secteur en Côte d’Ivoire, Abidjan, les 11 et 12 août 2020.
Présentation de l'Agence pour le Développement de la filière Riz.
Réunion de haut niveau sur les défis majeurs de l'heure du secteur en Côte d’Ivoire, Abidjan, les 11 et 12 août 2020.
Expérience de l’AOPP portant sur le Projet d’Appui à l’Amélioration du Systèm...Michela Paganini
Représentant de l’Association des Organisations Professionnelles Paysannes (AOPP).
Réunion de haut niveau sur les défis majeurs de l'heure du secteur en Côte d’Ivoire, Abidjan, les 11 et 12 août 2020.
Activités Semencières dans le Cadre du Programme National d'Investissement Agricole 2.
Réunion de haut niveau sur les défis majeurs de l'heure du secteur en Côte d’Ivoire, Abidjan, les 11 et 12 août 2020.
SAA MALI: Modèle de production de semence communautaireMichela Paganini
SASAKAWA AFRICA ASSOCIATION / SASAKAWA GLOBAL 2000
Réunion de haut niveau sur les défis majeurs de l'heure du secteur en Côte d’Ivoire, Abidjan, les 11 et 12 août 2020.
Présentation du secteur semencier au Mali par Siraman SAMAKE.
Réunion de haut niveau sur les défis majeurs de l'heure du secteur en Côte d’Ivoire, Abidjan, les 11 et 12 août 2020.
On 20 and 21 November, 2017, AfricaSeeds and the Food and Agriculture Organization gathered representatives from 12 African countries to validate their newly developed set of tools to improve seed operations, the Seed Operations Toolkit. The Toolkit Module 5.2 elaborates on Seed marketing principles.
2. Le conférencier est Monsieur AZI LEOPOLD DIBY. Il est Electronicien ;
Informaticien de formation de base. Il est un Acteur du monde Agricole et Rural
depuis plus de 30 ans : Exploitant Agricole et Forestier ; Eleveur ; Semencier.
Administrateur de BEERA (Bureau d’Etudes ; d’Equipement ; de Réalisation et
d’Aménagement) ; Concepteur de logiciels de Gestion Agricole: Traçabilité ;
Coach en Certification Cacao culture ; Expert PIP COLEACP (Programme pour un
développement durable du secteur fruits et légumes Afrique – Caraïbes –
Pacifique) ; Formateur de Formateurs ; Membre de Réseau FAR (Formation
Agricole et Rurale) ; Président de l’ARLASEMCI et de l’ANASEMCI (Association
Nationale des Semenciers de Côte d’Ivoire) ; membre de CONASEMCI (Comité
National des Semences de Côte d’Ivoire) ; Président de la PANAFCI (Plateforme
d’Action Nationale pour l’Agriculture Familiale en Côte d’Ivoire) ; membre de
PROMEXA (Association pour la Promotion des Exportations Agricoles non
Traditionnelles de Côte d’Ivoire) ; de l’ANOPACI (Association Nationale des
Organisations Professionnelles des Agriculteurs de Côte d’Ivoire) ; de l’OMA
(Organisation Mondiale des Agriculteurs) ; de l’AFSTA (Association Africaine de
Commerce des Semences) ; Professionnel Expert Consultant membre d’une Task
Force pour l’Agriculture et le Développement Rural. Co-Promoteur du Master
Professionnel en Industrie des Semences. Il contribue au projet ACAA (Améliorer
le Climat des Affaires dans l’ Agriculture) du Groupe de la Banque Mondiale.
Il est Chevalier dans l’Ordre National de la République de Côte d’Ivoire.
Présentation du conférencier
4. Changement Climatique
Changement de Mentalité
Changement de Mode d’actions
Vision Intégrée pour la Durabilité
Mission de l’Être Humain
en Harmonie avec la Nature
# Eldorado - Exploitation - Désastres
# Terre Promise - Transforme - Trésor
# Cultiver l’Esprit de Service pour la Génération Future
Le Changement Climatique Préoccupation Mondiale
5. Approche pour un Développement Durable
Pouvoir Régalien
Sécurisation
Etat
Son Intérêt
Durabilité
Privé
Une Cause
Catalyseur
Agences Financement
Agences Internationales
Ministères
Pouvoirs Locaux
ONGs
Projets Sectoriels
Agences Etatiques
Agences Recherche
Agences Vulgarisation
Partenaires
« Faire » « Faire Faire » « Permettre de Faire »
# Concertation État - Partenaire Développement - Secteur Privé
6. Impact Social du
Développement Durable
Norme
RévolteVécu
ExodePauvreté
Misère
Partage PaixRichesse
Fortune RichesseValorisation
# La Solidarité pour un Monde Meilleur
7. L’Impulsion du Changement dans la Société
Prise de Conscience
Actions Jugées
Révolution Evolution
Société
Changement
Négatives / Positives
Autres Soi
# C’est une Question de Vision et d’Objectifs
Espoirs Perdus Longue Attente
8. La Contribution à l’Action
AprèsPendantAvant
ReleverSoutenirEncourager
PérennitéMise en ŒuvreCréation
# La Réussite: Savoir reconnaitre la Contribution des Autres
10. date
Présentateur:
Léopold Azi DIBY
Chevalier de l’Ordre National
Exploitant Agricole et Forestier
Professionnel Expert Semencier
Président des Semenciers de Côte d’Ivoire
Le Développement Durable de l’Agriculture
Les Acquis et les Enjeux de la Filière Semencière
La Contribution du Secteur Semencier à la Sécurité Alimentaire
et la Nutrition, de ce fait à l’Essor de nos Pays – de l’ Afrique
Face aux changements climatiques et à la situation socio-économique,
le développement durable de l’agriculture se présente comme
un défi majeur à relever.
Qu’elle est, peut-être la contribution du secteur semencier à la sécurité
alimentaire et la Nutrition, de ce fait à l’essor de nos pays
et de l’Afrique ?
12. 1. Importance de la Semence
2. Problématiques de la Semence
3. Impact de la Semence
OBJECTIFS
L’objectif de la communication et des actions est
d’apporter une compréhension des acquis et enjeux du
secteur semencier, en convergence avec les attentes du
développement durable. Cela, à travers : (l) l’importance
de la semence ; (ll) les problématiques de la semence ;
(lll) l’impact de la semence.
16. L’Association Nationale des Semenciers
de Côte d’Ivoire (ANASEMCI)
2014 (AIAF) Année Internationale de l’Agriculture Familiale
28 Juin 2014 Agriculture Familiale
Contribution à l’Autonomisation
des Femmes
200 Localités / Unité de 10 / 2000 Femmes
(180 Villages – 16 Sous-Préfectures –
4 Groupement de la Commune de Korhogo)
Productivité: 250 kg # 1000 kg par 1/4 ha
# Impact de la Disponibilité de la Semence de Qualité en Quantité
Mise à la disposition:
Dix tonnes de Semence Certifiée de Maïs BEERA
EV 8728 SR à haut rendement, résistante à la
sècheresse à deux mille (2000) Femmes pour
plus de 500 ha en Culture dans la Région du Poro
à Korhogo.
Sous le parrainage du Ministre de
l’Agriculture, Monsieur
Mamadou SANGAFOWA COULIBALY
17. La Fondation LADY JEANNE
8 Août 2015 Marahoué
Contribution à l’Autonomisation
des Femmes
Vers la création d’une économie de négoce
autour du Maïs dans la Marahoué
Départements: Sinfra – Bouaflé – Zuénoula
dans tous les villages
Mise à la disposition:
30 tonnes de Semence Certifiée de Maïs BEERA
EV 8728 SR à haut rendement, résistante à la
sècheresse à six mille (6000) Femmes pour plus
de 1500 ha en Culture dans la Région de la
Marahoué à Bouaflé. Référence Emission RTI 1
Entreprenantes & Dynamiques
La Fondation Lady Jeanne
a commis le cabinet BEERA pour
le suivi et la coordination
2016 Marahoué Première Région
Productrice de Maïs de grains
La Fondation Lady Jeanne
Présidente Madame DIBY Beatrice épouse DIBY
18. Vision et Orientation pour Assister les Femmes
et les Jeunes du Monde Rural et Agricole
Autonomisation des Femmes et Jeunes – Bien Etre
Femmes
Activités Agricoles
Commercialisation
Semencier
Semences
DonsBonne Volonté
Investissements
Assistance - Espoir
Operateur
Economique
Jeunes
Accompagnements
Activités régulières et évolutives
# Hommage à Madame YAO KRA JEANNE Epouse DIBY
Formation
Misère
20. La Fonction de la Recherche dans le Secteur Semencier
Nature
Observation
Tradition
Sélection
Génétique
Manipulation
La Semence émane de la Nature
# Militer pour la Tradition # Défendre la Modernité
# La Diffusion de la Semence par sa Multiplication
21. La Problématique de la Création de Variété de Semence
Naissance d’une Variété de Semence
Testes
Notification
Contrôle
Inscription au Catalogue Officiel
Règlement Technique Officiel
DHS
VATE
Obtenteur
# Apport de Capitaux: Financement
23. La Problématique de la Disponibilité de la Semence
Mainteneur
# Apport de Capitaux: Investissement
24. Semence Précède la Production
Traçabilité sur la semence : la chaîne de valeur
Obtenteur
RECHERCHE
Agriculteur
Multiplicateur
Traitant
Stockage
Distributeur
Innover
Préserver
Promouvoir
Diffuser
Multiplier
Sous contrat
Nettoyer
Protéger
Maintenir
Pouvoir germinatif
Approvisionner
Marché
S
E
M
E
N
C
I
E
R
Producteur Agricole
Producteur
Filière - Industrie Semencière
Entreprise
Semencière
Ordonnateur
La semence est et doit être une Affaire de Professionnels
Secteur Semencier
Source d’Emploies
25. Recherche Agence Vulgarisation
Agriculteur Producteur Semences
Problématique de la Gestion de la Production de Semences
Etat
Recherche
Producteur
Semences
Semence
Agriculteur
Alimentation
ProjetsAgricoles
ProjetsAgricoles
FINANCEMENTS
# Apport de Capitaux: Subvention
Semences Fermières
Semences Certifiées
26. 5 Organismes Consacrés Piliers du
Développement Agricole - Côte d’Ivoire
Vulgarisation 1993
Agriculteurs 1998
Financement 2002
Semenciers 2009
2010Arrêtés
# FHB: Nouvelle Orientation Agriculture Ivoirienne 1992 Décret Présidentiel
1981
1990
Recherche 1998
2018
Observation:
Plan Directeur du Développement Agricole 1992 - 2015
2014
Activités
2019
Formation
2015PR ( SARA)
2014Utilité Publique
2009CEDEAO
2008 UEMOA
27. Organisations Professionnelles Agricoles
Agriculteurs Professionnels
Agro-Industrielles
Clients – Semence Certifiée
Clients Quantité Motivation
Programmes – Projets
Etat Central – Décentralise
Partenaires aux Développements
Bailleurs de Fonds
ONG – Fondations
Bonne Volonté - Promotions
Salaries de Familles de Paysans
Paysans
Grande
Dons
Subventions
Nécessaire Investir
Apport Autonomiser
Petite
Pas
Finances
Information
Nécessaire Investir
Paysans
Petite Finances
Programmes – Projets
Etat Central – Décentralise
Partenaires aux Développements
Bailleurs de Fonds
ONG – Fondations
Bonne Volonté - Promotions
Grande
Dons
Subventions
Organisations Professionnelles Agricoles
Agriculteurs Professionnels
Agro-Industrielles - Privés
Lois des Marchés Publiques
REGLEMENTATION
# L’Implication Sincère de Tous Acteurs du Développement
28. Le Financement de l’Agriculture et de la Recherche
par le Commerce de la Semence Certifiée
ANASEMCICNRA ANADER
FIRCA
ANOPACISIS Commerce
Production
Semences Certifiées
# Mutualisation de l’Assistance
29. Technologie de l’Information et de la Communication TIC
E-Agriculture - Semence Certifiée (SIS)
Recherche (SIR)
Exploitant
Agricole (SIG)
Normes
Commercialisation (SIC)
Service Apres Vente (SIA)
Producteur
Semences (SIP)
(ITS) Taux
d’Adoption
Récompense
Essentielle
* Outil de Traçabilité # Chaîne Infos erronées
Indicateurs
Validations
Applications
30. Former - Professionnaliser
Fondement
Chaîne de Mise en
Valeur
Chercheur
Semencier Etat
Agriculteur
Potentiel
Existence
Productivité ViableQuantitéDimensionner Semence
La Valeur de la Semence et
les Projets Agricoles de Développement
1
2
34
5
6
7 8
1 2
Activité
Semences 80%
Acteurs 20%
Théorie DIBY
# Au Commencement, était la Semence…
# La Semence
est l’Essence
de l’Essentiel
# Loi de Pareto
La règle des 80 / 20
31. Recevoir Gérer
Professionnalisation Formation Entrepreneuriat
Action
Exercer
ActivitéCapacité
Transmission de la Connaissance : Secteur Semencier
Savoir
Savoir Faire Savoir ÊtreSavoir
# Master Professionnel en Industrie Semencière
32. Du 16 au 20 février 2016, à la fondation Felix Houphouët Boigny de Yamoussoukro
Congrès International AISA sur le thème :
Agriculture Durable et Sécurité Alimentaire en Afrique : Valorisation des Connaissances
Le Représentant du Président de la République, le Conseiller Dr Fofana Mamadou
Un expose sur « Les Problématiques de la Semence » par
Pr. DIBY AZI LEOPOLD, Professionnel Expert en Semence
Les 21 et 22 mars 2012 à l’AISA à l’initiative de l’ARLASEMCI et avec
le financement de l’AFSTA (Association Africaine de Commerce de Semences)
une Formation des Acteurs du Secteur Semencier Ivoirien.
L’Avenir d’un Pays et la Formation de ses Jeunes
MASTER PROFESSIONNEL EN INDUSTRIE DES SEMENCES «Émergence de startups»
ANASEMCI (ARLASEMCI) # Universités % FÉLIX HOUPHOUËT-BOIGNY
% NANGUI ABROGOUA % JEAN LOROUGNON GUÉDÉ % PELEFORO GON COULIBALY
& % INSTITUT NATIONAL POLYTECHNIQUE FÉLIX HOUPHOUËT-BOIGNY
Le 22 Décembre 2016 Conférence Publique AISA
Les Enjeux et les Acquis de la Filière Semencière en Côte d’ Ivoire – ANASEMCI
ARLASEMCI – Yamoussoukro du 24 au 28 Mai 2010 Formation des
Contrôleurs Semenciers Internes sur les règlements techniques harmonisés et les normes
de productions de semences en Cote d’Ivoire par le cabinet BEERA
Le 25 Octobre 2011 Signature de Convention de Partenariat entre
l’AISA (Association Ivoirienne des Sciences Agronomiques) et
l’ARLASEMCI (Association Régionale des semenciers des Lagunes-Côte d’Ivoire).
27 Mai 2014 Signature de la Convention de Partenariat entre l’Université Félix
HOUPHOUËT-BOIGNY, représentée par son Président, Professeur BAKAYOKO-LY
Ramata, et l’Association Régionale des Semenciers des Lagunes de Côte d’Ivoire
(ARLASEMCI) membre fondateur de l’ANASEMCI, représentée par son Président,
Monsieur DIBY Azi Kouassi Leopold
06 Mai 2016 Photos de la Conférence Académique à l’Université
NANGUI ABROGOUA – Partenariat UFR des Sciences de la Nature / ANASEMCI
35. A Retenir
Quel que soit
UtilisateurFournisseurOrigine
Est-ce qu’on attend de la Semence ?
Pureté Spécifique
Faculté Germinative
Conformité Variétale
En fonction des Conditions Pédo-climatiques
QuantitéAccessibilitéDisponibilité
Qualité Sanitaire
En Situation - de Crise - d’Après Crise - Normale
La Semence
36. Association Nationale des Semenciers: Incubateur Agricole
Informer
Sensibiliser
Former
Professionnaliser
Assister
Assumer
Responsabilité
Semenciers
Pays
Partenaires
Semences Association
Qualité & QuantitéResponsabilité
Préoccupation Commercialisation
# PLAFORME: SYSTÈME D’INFORMATION POUR LA
COMMERCIALISATION DES SEMENCES (SIS)
Acteurs
Chaîne de Valeur
Les Perspectives du Secteur Semencier:
37. Producteurs Agricoles
Productions
Impact de la Semence
sur la Sécurité Alimentaire et l’Essor Économique
Chômage
Sociétes
Prestataires
de Services
Sécurité Alimentaire Richesse
Cadre Réglementaire
Secteur Semencier
Paix
# Vision
Père Fondateur
Felix HOUPHOUËT-BOIGNY
Planteur
Agro-Industrie
Marchés
Exportations