Cartographie des réseaux de transport d'énergie - 11/2015François Lacombe
Supports de la présentation faite au TUBA à Lyon lors de la session TUBAXPerts #7.
Deux parties : le contexte puis quelques cas très généraux d'utilisation
The document describes the main parts of an alternator and how to identify the terminals of a voltage regulator. It lists the 7 main parts of an alternator as: 1) slip rings 2) brushes 3) rotor coil 4) regulator 5) voltage relay 6) resistor 7) shoes. It then explains that the F terminal of the regulator is connected to the iron core and one leg of the resistor, the IG terminal is connected to the other leg of the resistor, and the other terminals L, B, N, and E are respectively connected to other parts of the voltage relay and body.
El documento trata sobre las normativas internacionales para la interconexión de sistemas de generación distribuida a redes eléctricas. Describe varias normas clave como IEEE 1547-2003, IEC 61727 e IEC 61000, las cuales establecen requisitos para la conexión de este tipo de sistemas, incluyendo límites de inyección de armónicos, respuesta a fallas de tensión/frecuencia, detección de isla y calidad de suministro. El autor analiza los requerimientos técnicos de estas normativas
La cartographie des réseaux de transport d'énergie avec OpenStreetMapFrançois Lacombe
Présentation donnée le 5 avril à l'occasion de la conférence annuelle State of The Map organisée par OpenStreetMap France.
Les réseaux de transport d’énergie et plus particulièrement les réseaux électriques sont de plus en plus au centre de l'activité humaine. Cette présentation montre comment il est possible de produire des données et créer de la valeur autour de la cartographie de ces infrastructures.
Practicas Básicas programadas mediante Arduino, realizadas digitales y físicamente, básicas, sencillas de programar, cada una de estas tiene y cuenta con un OBJETIVO, DESARROLLO y CÓDIGO mediante el cual podremos entender y realizar las practicas sin problema alguno.
Cartographie des réseaux de transport d'énergie - 11/2015François Lacombe
Supports de la présentation faite au TUBA à Lyon lors de la session TUBAXPerts #7.
Deux parties : le contexte puis quelques cas très généraux d'utilisation
The document describes the main parts of an alternator and how to identify the terminals of a voltage regulator. It lists the 7 main parts of an alternator as: 1) slip rings 2) brushes 3) rotor coil 4) regulator 5) voltage relay 6) resistor 7) shoes. It then explains that the F terminal of the regulator is connected to the iron core and one leg of the resistor, the IG terminal is connected to the other leg of the resistor, and the other terminals L, B, N, and E are respectively connected to other parts of the voltage relay and body.
El documento trata sobre las normativas internacionales para la interconexión de sistemas de generación distribuida a redes eléctricas. Describe varias normas clave como IEEE 1547-2003, IEC 61727 e IEC 61000, las cuales establecen requisitos para la conexión de este tipo de sistemas, incluyendo límites de inyección de armónicos, respuesta a fallas de tensión/frecuencia, detección de isla y calidad de suministro. El autor analiza los requerimientos técnicos de estas normativas
La cartographie des réseaux de transport d'énergie avec OpenStreetMapFrançois Lacombe
Présentation donnée le 5 avril à l'occasion de la conférence annuelle State of The Map organisée par OpenStreetMap France.
Les réseaux de transport d’énergie et plus particulièrement les réseaux électriques sont de plus en plus au centre de l'activité humaine. Cette présentation montre comment il est possible de produire des données et créer de la valeur autour de la cartographie de ces infrastructures.
Practicas Básicas programadas mediante Arduino, realizadas digitales y físicamente, básicas, sencillas de programar, cada una de estas tiene y cuenta con un OBJETIVO, DESARROLLO y CÓDIGO mediante el cual podremos entender y realizar las practicas sin problema alguno.
Effect of Nanoporous Anodic Aluminum Oxide (AAO) Characteristics On Solar Abs...A Behzadmehr
Nanoporous anodic aluminum oxide (AAO) has been used in many different fields of science and technology, due to its great structural characteristics. Solar selective surface is an important application of this type porous material. This paper investigates the effect of nanoporous AAO properties, including; film thickness, pore area percentage and pore diameter, on absorption spectra in the range of solar radiation. The parameters were verified individually depending on anodization condition, and the absorption spectra were characterized using spectrophotometer analysis. The results showed that the absorptivity was increased with growth of the film thickness. Furthermore, increasing the pore diameter shifted the absorption spectra to the right range, and vice versa. The investigation revealed the presence of an optimum pore area percentage around 14% in which the absorptivity was at its maximum value.
The document discusses corrosion and its theories. It defines corrosion as the gradual deterioration of a metal through a chemical or electrochemical reaction with its environment. There are three main theories of corrosion discussed: acid theory, dry/chemical corrosion, and electrochemical/wet corrosion. Electrochemical corrosion involves the formation of an anode and cathode on a metal surface when it is exposed to an electrolyte. Metal ions are released at the anode through oxidation and electrons flow to the cathode. The document also discusses types of corrosion like galvanic corrosion and factors that influence corrosion.
The document discusses cargo tank venting and inert gas systems on board ships. It introduces the inert gas system and explains how it works to suppress flammability through increasing the oxygen content. It describes the key components of inert gas systems including scrubbers, fans, deck water seals, and instrumentation. It also covers inert gas production methods, system layouts, and applications to shipboard operations like cargo handling and tank washing.
A SHORT REVIEW ON ALUMINIUM ANODIZING: AN ECO-FRIENDLY METAL FINISHING PROCESSJournal For Research
Protection of aluminium alloys is most commonly done by forming anodic films. Anodic films can also be formed on metals like titanium, zinc, magnesium, niobium, and tantalum. Aluminium alloy parts are anodized to greatly increase the thickness of the natural oxide layer for corrosion resistance. A thin aluminium oxide film, that seals the aluminium from further oxidation when it is exposed to air. The anodizing process increases the thickness of the oxidized surface. Anodizing is accomplished by immersing the aluminium into an acid electrolyte bath and passing an electric current through the medium. In an anodizing cell, the aluminium work piece is made the anode by connecting it to the positive terminal of a dc power supply and the cathode is connected to the negative terminal of the dc source. Sealing is needed to seal the pores in oxide layer to prevent further corrosion. Oxide layer on the anodized aluminium has a highly ordered, porous structure that allows for secondary processes such as dyeing, printing and sealing. Nanowires and nanotubes can be made by using the pores in the oxide layer as templates.
Anodizing is an electrochemical process that converts the metal surface of aluminum to aluminum oxide. It produces a coating that is very durable, corrosion resistant, and maintains the metallic appearance of the aluminum. The anodizing process involves racking parts for processing, cleaning, etching, anodizing in an acid bath using electricity, coloring or sealing the pores, and testing to quality check the coating. Anodized aluminum has advantages like durability, low maintenance, and an environmentally friendly process.
Protection des métaux contre la corrosionCHTAOU Karim
Cette présentation présentent tout d’abord les principaux types de la corrosion et il présente une description détaillée des trois grandes méthodes, préventives et curatives, utilisées en anticorrosion.
This lecture describes the process of anodic oxidation of aluminium, which is one of the most unique and commonly used surface treatment techniques for aluminium; it illustrates the weathering behaviour of anodized surfaces. Some familiarity with the subject matter covered in TALAT This lectures 5101- 5104 is assumed.
Présentation de la plate-forme d'éco-conception CORINEBrice Kosinski
Eurocopter, leader mondial de la filière hélicoptère, a pris l’initiative du projet CORINE pour réduire l’impact environnemental sur la chaîne d’approvisionnement de ses produits civils.
Planifié sur trois ans, CORINE a pour objectif de fournir aux PME un outil d’éco-conception collaboratif entre donneurs d’ordre et fournisseurs. Il permettra d’identifier et d’intégrer de nouveaux matériaux et procédés tout au long du cycle de vie de l’hélicoptère.
CORINE est un outil collaboratif d'éco-conception unique en son genre. Les points clés innovants de l’outil d’éco-conception :
- Interface collaborative entre donneurs d’ordre et fournisseurs permettant de faire des choix en matière d’éco-conception
- Outil simple d’utilisation pour sélectionner les matériaux et procédés améliorant la performance environnementale
- Outil conçu pour la filière aéronautique et adaptable à des secteurs similaires
The document discusses the development of sealed resistive plate chambers (sRPCs) as a more flexible alternative to gas ionization detectors that do not require a gas system. Several prototype sRPCs were constructed and two were tested with radioactive sources, though two failed on the first day with little response. Signals from the functioning chambers increased over time, and high voltage had to be decreased to avoid streamers but with reduced gain. Further testing is needed to evaluate resolution, efficiency, isolation, and alternative gas mixtures to better understand aging effects in sRPCs.
Effect of Nanoporous Anodic Aluminum Oxide (AAO) Characteristics On Solar Abs...A Behzadmehr
Nanoporous anodic aluminum oxide (AAO) has been used in many different fields of science and technology, due to its great structural characteristics. Solar selective surface is an important application of this type porous material. This paper investigates the effect of nanoporous AAO properties, including; film thickness, pore area percentage and pore diameter, on absorption spectra in the range of solar radiation. The parameters were verified individually depending on anodization condition, and the absorption spectra were characterized using spectrophotometer analysis. The results showed that the absorptivity was increased with growth of the film thickness. Furthermore, increasing the pore diameter shifted the absorption spectra to the right range, and vice versa. The investigation revealed the presence of an optimum pore area percentage around 14% in which the absorptivity was at its maximum value.
The document discusses corrosion and its theories. It defines corrosion as the gradual deterioration of a metal through a chemical or electrochemical reaction with its environment. There are three main theories of corrosion discussed: acid theory, dry/chemical corrosion, and electrochemical/wet corrosion. Electrochemical corrosion involves the formation of an anode and cathode on a metal surface when it is exposed to an electrolyte. Metal ions are released at the anode through oxidation and electrons flow to the cathode. The document also discusses types of corrosion like galvanic corrosion and factors that influence corrosion.
The document discusses cargo tank venting and inert gas systems on board ships. It introduces the inert gas system and explains how it works to suppress flammability through increasing the oxygen content. It describes the key components of inert gas systems including scrubbers, fans, deck water seals, and instrumentation. It also covers inert gas production methods, system layouts, and applications to shipboard operations like cargo handling and tank washing.
A SHORT REVIEW ON ALUMINIUM ANODIZING: AN ECO-FRIENDLY METAL FINISHING PROCESSJournal For Research
Protection of aluminium alloys is most commonly done by forming anodic films. Anodic films can also be formed on metals like titanium, zinc, magnesium, niobium, and tantalum. Aluminium alloy parts are anodized to greatly increase the thickness of the natural oxide layer for corrosion resistance. A thin aluminium oxide film, that seals the aluminium from further oxidation when it is exposed to air. The anodizing process increases the thickness of the oxidized surface. Anodizing is accomplished by immersing the aluminium into an acid electrolyte bath and passing an electric current through the medium. In an anodizing cell, the aluminium work piece is made the anode by connecting it to the positive terminal of a dc power supply and the cathode is connected to the negative terminal of the dc source. Sealing is needed to seal the pores in oxide layer to prevent further corrosion. Oxide layer on the anodized aluminium has a highly ordered, porous structure that allows for secondary processes such as dyeing, printing and sealing. Nanowires and nanotubes can be made by using the pores in the oxide layer as templates.
Anodizing is an electrochemical process that converts the metal surface of aluminum to aluminum oxide. It produces a coating that is very durable, corrosion resistant, and maintains the metallic appearance of the aluminum. The anodizing process involves racking parts for processing, cleaning, etching, anodizing in an acid bath using electricity, coloring or sealing the pores, and testing to quality check the coating. Anodized aluminum has advantages like durability, low maintenance, and an environmentally friendly process.
Protection des métaux contre la corrosionCHTAOU Karim
Cette présentation présentent tout d’abord les principaux types de la corrosion et il présente une description détaillée des trois grandes méthodes, préventives et curatives, utilisées en anticorrosion.
This lecture describes the process of anodic oxidation of aluminium, which is one of the most unique and commonly used surface treatment techniques for aluminium; it illustrates the weathering behaviour of anodized surfaces. Some familiarity with the subject matter covered in TALAT This lectures 5101- 5104 is assumed.
Présentation de la plate-forme d'éco-conception CORINEBrice Kosinski
Eurocopter, leader mondial de la filière hélicoptère, a pris l’initiative du projet CORINE pour réduire l’impact environnemental sur la chaîne d’approvisionnement de ses produits civils.
Planifié sur trois ans, CORINE a pour objectif de fournir aux PME un outil d’éco-conception collaboratif entre donneurs d’ordre et fournisseurs. Il permettra d’identifier et d’intégrer de nouveaux matériaux et procédés tout au long du cycle de vie de l’hélicoptère.
CORINE est un outil collaboratif d'éco-conception unique en son genre. Les points clés innovants de l’outil d’éco-conception :
- Interface collaborative entre donneurs d’ordre et fournisseurs permettant de faire des choix en matière d’éco-conception
- Outil simple d’utilisation pour sélectionner les matériaux et procédés améliorant la performance environnementale
- Outil conçu pour la filière aéronautique et adaptable à des secteurs similaires
The document discusses the development of sealed resistive plate chambers (sRPCs) as a more flexible alternative to gas ionization detectors that do not require a gas system. Several prototype sRPCs were constructed and two were tested with radioactive sources, though two failed on the first day with little response. Signals from the functioning chambers increased over time, and high voltage had to be decreased to avoid streamers but with reduced gain. Further testing is needed to evaluate resolution, efficiency, isolation, and alternative gas mixtures to better understand aging effects in sRPCs.
This document discusses a manual pump and hydraulics. It contains technical terms related to pumping systems and fluid transfer but provides no other context or details to understand the topic. The document is short and technical terms are the only information given.
Ici, un diaporama des étapes de vérification d'une batterie d'accumulateur de la prise de la tension j'usqu'au load test en passant par la densité de l'électrolyte...
Cycle de Formation Théâtrale 2024 / 2025Billy DEYLORD
Pour la Saison 2024 / 2025, l'association « Le Bateau Ivre » propose un Cycle de formation théâtrale pour particuliers amateurs et professionnels des arts de la scène enfants, adolescents et adultes à l'Espace Saint-Jean de Melun (77). 108 heures de formation, d’octobre 2024 à juin 2025, à travers trois cours hebdomadaires (« Pierrot ou la science de la Scène », « Montage de spectacles », « Le Mime et son Répertoire ») et un stage annuel « Tournez dans un film de cinéma muet ».
Conseils pour Les Jeunes | Conseils de La Vie| Conseil de La JeunesseOscar Smith
Besoin des conseils pour les Jeunes ? Le document suivant est plein des conseils de la Vie ! C’est vraiment un document conseil de la jeunesse que tout jeune devrait consulter.
Voir version video:
➡https://youtu.be/7ED4uTW0x1I
Sur la chaine:👇
👉https://youtube.com/@kbgestiondeprojets
Aimeriez-vous donc…
-réussir quand on est jeune ?
-avoir de meilleurs conseils pour réussir jeune ?
- qu’on vous offre des conseils de la vie ?
Ce document est une ressource qui met en évidence deux obstacles qui empêchent les jeunes de mener une vie épanouie : l'inaction et le pessimisme.
1) Découvrez comment l'inaction, c'est-à-dire le fait de ne pas agir ou d'agir alors qu'on le devrait ou qu'on est censé le faire, est un obstacle à une vie épanouie ;
> Comment l'inaction affecte-t-elle l'avenir du jeune ? Que devraient plutôt faire les jeunes pour se racheter et récupérer ce qui leur appartient ? A découvrir dans le document ;
2) Le pessimisme, c'est douter de tout ! Les jeunes doutent que la génération plus âgée ne soit jamais orientée vers la bonne volonté. Les jeunes se sentent toujours mal à l'aise face à la ruse et la volonté politique de la génération plus âgée ! Cet état de doute extrême empêche les jeunes de découvrir les opportunités offertes par les politiques et les dispositifs en faveur de la jeunesse. Voulez-vous en savoir plus sur ces opportunités que la plupart des jeunes ne découvrent pas à cause de leur pessimisme ? Consultez cette ressource gratuite et profitez-en !
En rapport avec les " conseils pour les jeunes, " cette ressource peut aussi aider les internautes cherchant :
➡les conseils pratiques pour les jeunes
➡conseils pour réussir
➡jeune investisseur conseil
➡comment investir son argent quand on est jeune
➡conseils d'écriture jeunes auteurs
➡conseils pour les jeunes auteurs
➡comment aller vers les jeunes
➡conseil des jeunes citoyens
➡les conseils municipaux des jeunes
➡conseils municipaux des jeunes
➡conseil des jeunes en mairie
➡qui sont les jeunes
➡projet pour les jeunes
➡conseil des jeunes paris
➡infos pour les jeunes
➡conseils pour les jeunes
➡Quels sont les bienfaits de la jeunesse ?
➡Quels sont les 3 qualités de la jeunesse ?
➡Comment gérer les problèmes des adolescents ?
➡les conseils de jeunes
➡guide de conseils de jeunes
Formation M2i - Onboarding réussi - les clés pour intégrer efficacement vos n...M2i Formation
Améliorez l'intégration de vos nouveaux collaborateurs grâce à notre formation flash sur l'onboarding. Découvrez des stratégies éprouvées et des outils pratiques pour transformer l'intégration en une expérience fluide et efficace, et faire de chaque nouvelle recrue un atout pour vos équipes.
Les points abordés lors de la formation :
- Les fondamentaux d'un onboarding réussi
- Les outils et stratégies pour un onboarding efficace
- L'engagement et la culture d'entreprise
- L'onboarding continu et l'amélioration continue
Formation offerte animée à distance avec notre expert Eric Collin
Newsletter SPW Agriculture en province du Luxembourg du 12-06-24BenotGeorges3
Les informations et évènements agricoles en province du Luxembourg et en Wallonie susceptibles de vous intéresser et diffusés par le SPW Agriculture, Direction de la Recherche et du Développement, Service extérieur de Libramont.
Le fichier :
Les newsletters : https://agriculture.wallonie.be/home/recherche-developpement/acteurs-du-developpement-et-de-la-vulgarisation/les-services-exterieurs-de-la-direction-de-la-recherche-et-du-developpement/newsletters-des-services-exterieurs-de-la-vulgarisation/newsletters-du-se-de-libramont.html
Bonne lecture et bienvenue aux activités proposées.
#Agriculture #Wallonie #Newsletter #Recherche #Développement #Vulgarisation #Evènement #Information #Formation #Innovation #Législation #PAC #SPW #ServicepublicdeWallonie